guitar cabinet ohm help PLEASE READ!!!! - Jemsite
Archived Topics and Common Questions Common topics/questions are archived here. You can reply but not start new threads here. New visitors please search the forum for a question possibly already discussed.

 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 12-27-2009, 01:13 PM Thread Starter
 
Join Date: Dec 2009
Posts: 3
guitar cabinet ohm help PLEASE READ!!!!

I own a peavey valveking halfstack and I dont know if i can break my amp by only having one speaker output jack plugged in to the amp going from the cab, it says the jacks are series paralelled and what not, is having one output jack plugged in ok? or am i supposed to have two for this amp? i just bought it yesterday on craigslist and it only came with one. is it running in mono right now, and if i plug two jacks in does it run in stereo? im a tube amp noob please help me out!
nickferraroawesome is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 12-27-2009, 01:23 PM
 
Join Date: Mar 2006
Location: Urbana, IL
Posts: 1,676
Reviews: 1
Re: guitar cabinet ohm help PLEASE READ!!!!

You are fine running one cabinet. The Valve King cab is 16 ohms so set the head's impedance selector to 16 ohms. Only use (1) output from the head into (1) input on the cab.

You can run any single cab with a minimum impedance of 16 ohms or you can run any 2 cabs as long as their impedance is not lower than 8 ohms.

As far running stereo, the Valve King head is not stereo and neither is the cab. 2 inputs doesn't not necessarily make a cab stereo. To run in stereo, you need (2) heads or a head that uses (2) power amps. Even then you need some kind of effect to create the stereo imaging like a chorus or delay.

If you didn't get a manual for the head, then visit Peavey's site and download one. That will tell you everything you need to know about it.
toneboy is offline  
post #3 of 3 (permalink) Old 12-27-2009, 01:28 PM Thread Starter
 
Join Date: Dec 2009
Posts: 3
Re: guitar cabinet ohm help PLEASE READ!!!!

thanks man that helped alot i feel safer to play now! you cleared everything up i needed to know haha.
nickferraroawesome is offline  
 

Tags
peavey valveking

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
FS:RA412CS Randall Guitar Cabinet 4x12/Celestion Vintage 30s LennyX Classified Ads: Guitars and Gear 1 06-24-2007 12:07 AM
FS:RA412CS Randall Guitar Cabinet 4x12/Celestion Vintage 30s LennyX Classified Ads: Guitars and Gear 0 06-23-2007 10:00 PM
A good guitar cabinet under $275? ZOMB13 Gear, Equipment, Recording & Off Topic 21 05-16-2006 08:43 PM
I need help, please read ... mcoenen Players & Bands, Music & Sounds, Tours & Jams, Lessons & Theory! 9 04-22-2004 11:20 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome