Join Date: Aug 2002
Location: Lehigh Valley, Pa.
Re: Ibanez Back Stop Tremsetter and Edge Pro Trems
I have the backstop in my '03 with the Edge-Pro
works fine for me although I DID have to cut some wood out to make it sit low enough...I could still go lower but I don't feel like chiseling & sanding anymore...it's working.
One thing I will advise is to find something close to the original "pad" that sticks to the block. At first, I mounted my backstop flush with the edge of the cavity but there was always a small amount of space between the plungers & the block. when I would pull up or warble, you'd always hear this clunk. Now that I have a piece of rubber in there, it's fine.