JS240PS - Jemsite
Ibanez JEM, UV, JS & Other Signature Models For discussion of Ibanez JEM, Universe and JS (Satriani) guitars only.

  • 1 Post By Rich
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 02-11-2021, 09:13 AM Thread Starter
Join Date: Jan 2006
Location: Brexit
Posts: 696

Just wondering what you JS fans out there think of the JS240PS, in terms of build quality, compared to the Japanese equivalent, the JS2480? I was dead against buying a non-Prestige JS but as the Sustainiac is something I wont be using every day I'm pretty sure that the JS240PS will be a better investment that the JS2480. Hoping to buy one from Rich so I will know what to expect following his proper QC check, but have heard horror stories about wood not being properly seasoned with the Indo guitars.

I've come to realise that the JS series is the most comfortable guitars I have ever played, so keep coming back to the JS range every now and again, keep trying other brands and models but I'm wasting my time and money - I started out on a battered 540 Radius, so thats spoilt me I guess.....
chris101 is offline  
Sponsored Links
post #2 of 6 (permalink) Old 02-11-2021, 09:43 AM
Join Date: Oct 2019
Posts: 386
I owned a js24p, the first iteration of the new 2400 indonesian Js models. Back then they still used the rosewood and bubinga in the neck...The difference in the overall fit and finish is in the neck. For the life of me I couldn't get the damn action low. Low for me is 1.5mm. I put a straight edge on the neck and the frets were not perfectly level. And the 15th fret slot was not correctly cut. Even perfectly intonated the tuning was sharp. I had the frets leveled and recrowned by a friend of mine and it was much better after that. Once the frets wore I had him refret it and it was excellent. The barrel jack died in 4 months, which isn't a deal breaker... The pots felt really loose and cheap. Almost no resistance while turning, I eventually replaced them with bourns pots. They were really loud when using the push pull function too. The tuners are cheap but since you have a locking nut that isn't really important. I did wind up selling it in the last quarter of last year for a HSH 540r.

The tough part is finding a place that actually has one so you can pick it up and play it. No where near me had one so I had to order it at the local shop. It was my first Js/radius style guitar and I fell in love with the sexy look and feel of the body so I couldn't turn it away lol. If you can order one without being obligated to keep the one that comes in (incase you aren't pleased) then I would say go for it. I have an indonesian epiphone les paul that is just fantastic... quality depends on the guys that are actually building the guitar... I hope this helps your decision some.
JsXLine6 is offline  
post #3 of 6 (permalink) Old 02-11-2021, 09:59 AM
Join Date: Jan 2015
Location: Midwest, USA
Posts: 154
Re: JS240PS

I do not have experience with the JS line. However I do have direct experience with the Vai JEM line.

Have the Indo blue floral pattern 2 model. The damn thing confounds me to no end. As the poster above noted, it is just harder to get the action and intonation set as well, compared to the Japanese JEM’s. Additionally, the hardware is a lot cheaper. The pots are worse, the trem is the cheaper version with lower quality machining, etc. etc.

I only hang onto the thing because the BFP2 is their best looking JEM, in my humble opinion. Absolutely love the dark, deep blues. But no, I’d save my money and get the Japanese model for their higher end signature models. Just my opinion, others will have different viewpoints.
The TPS Report is offline  
post #4 of 6 (permalink) Old 02-11-2021, 10:02 AM
Join Date: Oct 2019
Posts: 386
Yeah the trem at least is an edge on the Js premium guitars. Otherwise I wouldn't have took the chance.
JsXLine6 is offline  
post #5 of 6 (permalink) Old 02-11-2021, 11:54 AM
Rich's Avatar
Join Date: Dec 2000
Location: South Jersey
Posts: 26,111
Re: JS240PS

Premiums have come a long was since the pure crap they were when they first started building them 10 years ago, but they're still fast and wet and what's the point of ball fret ends you have to shave off within a year because the necks shrink. You can get away with a spot level on most of them but I never saw a Premium that couldn't benefit from a fret level. Then again getting 1.3mm action on a Japanese JS is probably going to require a spot level somewhere also. It's a tight radius either way.
aesthyrian likes this.
Rich is online  
post #6 of 6 (permalink) Old 02-18-2021, 10:57 AM
Join Date: Apr 2017
Location: Albuquerque, NM
Posts: 41
Re: JS240PS

I've noticed that with the JEM 7VWHP model. There seems to be slight differences with neck feel, tone and overall weight of the guitar. I have the 30th JEM777 Loch Ness Green, so I have something to compare it with. I really like the quality of the Indonesian JEM 7VWHP, but the tone of the guitar is so dark and beefy sounding. I was considering changing out the electronics, i.e., pots, 5-switch, capacitor, etc. Even though, this Indo JEM has the Evo pickups and the original Edge Tremolo, it just doesn't have that same Japanese JEM tone and feel. I've often wondered if other Indo JEM owner's have this same issue?
Designrol is offline  


Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome