Replacement Volume, Tone and 3-way Switch for a JS2400 - Jemsite
Ibanez JEM, UV, JS & Other Signature Models For discussion of Ibanez JEM, Universe and JS (Satriani) guitars only.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 09-05-2014, 05:02 PM Thread Starter
 
Join Date: Sep 2002
Location: Vancouver, BC
Posts: 168
Replacement Volume, Tone and 3-way Switch for a JS2400

Spilled soda liquid on the guitar ( accident of course) and now the volume, tone and switch don't work properly (scratchy, sticky).

So am looking to get new ones and wondering what they are - I do want the high-pass filter back and the coil-tap as well.

The one's I saw were on Rich's site www.ibanezrules.com (picture attached and marked with a red rectangle) but unsure if they are the same. Can someone help?

1. Do I need the same pots for volume and tone?
2. Is that 3-way switch the right one?

I'm handy with capacitors, electronics and a soldering iron so can put it together - just need the right ones first.

Thanks in advance.

Last edited by xperiate; 02-21-2017 at 12:40 AM.
xperiate is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 09-05-2014, 05:07 PM
Vendor
 
Rich's Avatar
 
Join Date: Dec 2000
Location: South Jersey
Posts: 25,589
Re: Replacement Volume, Tone and 3-way Switch for a JS2400

Unbolt everything until you can pull it away from the body enough to let it soak in a glass/bowl of water. Spin the pots, flip the switch. It's only sugar, it'll dissolve. Blow them out good with compressed air, and then let sit for a day before you put any signal thru them.
Rich is online  
post #3 of 4 (permalink) Old 09-05-2014, 05:48 PM Thread Starter
 
Join Date: Sep 2002
Location: Vancouver, BC
Posts: 168
Re: Replacement Volume, Tone and 3-way Switch for a JS2400

I'll give that a shot and report back. But if I was to buy replacements, should I be getting the ones I highlighted above?
xperiate is offline  
post #4 of 4 (permalink) Old 09-06-2014, 03:23 PM
 
Join Date: Dec 2000
Location: Greece
Posts: 833
Re: Replacement Volume, Tone and 3-way Switch for a JS2400

A contact cleaner might also help as well...
jazzedout is offline  
Reply

Tags
js2400 , js2410

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Seymour Duncan Blackout Set - Bridge and Neck, 3 way switch, volume/tone/battery avicenna777 Classified Ads: Guitars and Gear 0 07-04-2010 12:58 PM
Looking for green volume/tone knobs and switch tip Andy Mclaughlan Tech: Setup, Repairs and Mods 2 04-28-2009 11:21 AM
Volume/Tone pot replacement heffergm Tech: Setup, Repairs and Mods 2 03-20-2008 01:52 AM
FS: Yellow Volume,Tone Knobs & Switch Tip djpharoah Classified Ads: Guitars and Gear 4 05-13-2007 02:04 PM
Jem volume pot replacement question HSH Tech: Setup, Repairs and Mods 3 08-10-2006 08:45 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome