Custom parts compatability? - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 03-22-2008, 12:25 PM Thread Starter
Join Date: Dec 2006
Location: Wayne MI
Posts: 171
Custom parts compatability?

Ok looking to get a custom body swirled by perel guitars on **** (any reviews on them????)

And I can get a RG320 DXQM with a good neck but dinged body for $100.00. Both are AANJ will they work? are all AANJ same profile for mounting??
afireinside7444 is offline  
Sponsored Links
post #2 of 4 (permalink) Old 03-22-2008, 02:25 PM
Join Date: Dec 2005
Location: Worcester,MA
Posts: 4,924
Re: Custom parts compatability?

If the guy who build the body did his homework, then yes.
Lefty Robb is offline  
post #3 of 4 (permalink) Old 03-23-2008, 11:54 AM
Join Date: Jun 2006
Location: nashville
Posts: 787
Re: Custom parts compatability?

I bought one of those bodies and have some minor gripes about it. First off, the handle routing may look correct from the front, but on the back it is not done like Ibanez. Secondly, the neck mounting screws do not line up with a standard RG550/570 neck correctly(maybe a Korean neck will fit better?). The Japanese neck was too far forward by several mm(big gap between the neck pickup and the end of the fingerboard) and would never have intonated(the solution is to drill new holes in the neck heel). Also, you will have to drill some holes to get wiring thru to the pickup cavities and trem route for the ground wire. The pickup holes have flat bottoms so you may or may not need to make adjustments for whatever pickups you install. Go here
and click the SLIDESHOW button to see one assembled. Also note that the cover routing is a little too deep so Ibanez covers are sort of sunken in.
albee1952 is offline  
post #4 of 4 (permalink) Old 03-23-2008, 02:49 PM
Join Date: Dec 2005
Location: Worcester,MA
Posts: 4,924
Re: Custom parts compatability?

Then I guess the guy didn't do his homework...
Lefty Robb is offline  

neck pickup , pickup cavities

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
'Custom' Ibanez Shredder stuck in the 80s Ibanez JEM, UV, JS & Other Signature Models 40 05-16-2007 02:01 PM
Custom Parts eclecticmage Tech: Setup, Repairs and Mods 5 10-06-2006 03:38 AM
Totally customizing the RBM1 or a custom PGM? RCB All Other Guitars (including Prestige) 1 10-06-2004 11:27 AM
EVH Custom Shop Guitars - Opens on March 1, 2002 pri0531 All Other Guitars (including Prestige) 5 03-02-2002 08:47 AM
Looking for replacement (custom) JEM pickguards - JEM Parts Biker Buck All Other Guitars (including Prestige) 1 11-19-2001 07:35 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome