Edge Lo Pro - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 12-16-2012, 12:07 AM Thread Starter
 
Join Date: Dec 2012
Location: Kentucky
Posts: 4
Edge Lo Pro

I recently bought a 1991 S540 Ltd body for a project and know it came stock with the Edge Lo Pro trem. I am thinking about keeping the the lo pro. I do have a problem with this though. I found a site that sells them but there are so many different Lo Pro model numbers, I have no idea which one to order or how to decipher the model numbers to pick the right one for the S series neck I have on order. Does anyone have any information on this? This trem is much different than the Edge 2 0TRS on my RG. Any help would be greatly appreciated.
mcmoon03 is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 12-16-2012, 12:49 AM
 
Join Date: Jan 2001
Location: Florida
Posts: 450
Re: Edge Lo Pro

Your best bet is to just order it from Rich at Ibanezrules.com. You need the Edge Lo Pro. There's only one model but several finishes. The cosmo finish is 2LE1R31K.
MichelIV is offline  
post #3 of 7 (permalink) Old 12-16-2012, 01:28 AM
Banned
 
Join Date: Dec 2008
Location: Houston, TX
Posts: 9,291
Reviews: 98
Re: Edge Lo Pro

Yep--only one LoPro, but different finishes.
You can decipher the color codes on Rich's part's page:

http://www.ibanezrules.com/parts.htm



AlaskaBat is offline  
post #4 of 7 (permalink) Old 12-16-2012, 01:47 AM Thread Starter
 
Join Date: Dec 2012
Location: Kentucky
Posts: 4
Re: Edge Lo Pro

Thanks, that information is helpful, I was woried as there may have been a difference between model numbers regarding setup for the nut width.
mcmoon03 is offline  
post #5 of 7 (permalink) Old 12-16-2012, 02:02 AM
Banned
 
Join Date: Dec 2008
Location: Houston, TX
Posts: 9,291
Reviews: 98
Re: Edge Lo Pro

Quote:
Originally Posted by mcmoon03 View Post
Thanks, that information is helpful, I was woried as there may have been a difference between model numbers regarding setup for the nut width.
There are different locking nuts.



AlaskaBat is offline  
post #6 of 7 (permalink) Old 12-16-2012, 02:39 AM Thread Starter
 
Join Date: Dec 2012
Location: Kentucky
Posts: 4
Re: Edge Lo Pro

The neck I ordered is an original S series neck with the lock nut already attached, so it should be compatible. I believe the standard is 43mm. I am currently looking at an Edge Lo Pro with the Top Lok III which happens to be a 43mm system. The part number on this is 2LT43CKHV. I am currently assuming that it is the original with an updated locking system.
mcmoon03 is offline  
post #7 of 7 (permalink) Old 12-16-2012, 08:39 AM
 
Join Date: Dec 2000
Location: LR, AR
Posts: 1,982
Re: Edge Lo Pro

what's wrong with the current lo-pro edge?


rich
rty13ibz98 is offline  
Reply

Tags
model , numbers

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: square heel neck and edge/lopro edge needed nafigator Classified Ads: Guitars and Gear 0 03-27-2011 05:41 PM
LF: Lo-Pro Edge, Edge Pro or Edge Pro II in Madrid Spain kevlahnota Classified Ads: Guitars and Gear 2 03-24-2010 11:40 AM
FT Ibanez Edge Powder Cosmo Black for Edge Pro Gold supergirl20_06 Classified Ads: Guitars and Gear 1 06-26-2009 04:45 PM
WTB: Ibanez edge/LP edge/edge pro saddle mounting screws Ratit Classified Ads: Guitars and Gear 0 04-18-2009 08:16 PM
Replace Edge Pro With Edge/ Lo-pro Edge Trem Vaistarr Tech: Setup, Repairs and Mods 28 04-01-2008 12:18 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome