Re: Edge Studs higher on one side then the other
the edge studs have a locking screw that locks the stud in place. the locking screw is tiny and is IN the stud itself. you will need a smaller allen wrench to un loosen the adjusting screw that is located within the stud. so that you can lower the stud further.
Also, things to double check..
1. examine the neck and pocket joint. see if there are any debris that prevents the neck to sit correctly and level in the neck pocket.
2. probably when you reassembled the whammy system, you switched the two studs around.
3. there is probably dust and debris in the stud insert that prevents it from being lowered futher.