EMG Install - Output Jack - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 09-10-2007, 07:24 PM Thread Starter
 
Join Date: Feb 2006
Posts: 32
EMG Install - Output Jack

In the middle of installing an 81-7 in my RG7620. Only problem is that the output jack that comes with the EMG is too short.

Can you use the stock barrel type jack that is stock on the RG7620..or are there other ways of making the EMG jack fit?

Also if you use the stocker that has a white a bare wire soldered to it...whats the equivalent wires on the EMG to attach to solder to the posts?
Mind's Mirrors is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 09-10-2007, 07:33 PM
 
Join Date: Apr 2005
Location: Brampton, ON Canada
Posts: 553
Re: EMG Install - Output Jack

You need a long barrel stereo output jack for EMG's. I just installed the ZW 81/85 set. What is your email - I will send you the PDF file instructions I received from EMG.
guitvai1 is offline  
post #3 of 7 (permalink) Old 09-10-2007, 07:39 PM Thread Starter
 
Join Date: Feb 2006
Posts: 32
Re: EMG Install - Output Jack

Quote:
Originally Posted by guitvai1 View Post
You need a long barrel stereo output jack for EMG's. I just installed the ZW 81/85 set. What is your email - I will send you the PDF file instructions I received from EMG.
I appreciate it..

02camaroz28 (at) comcast (dot) net

Ill give it a go with the stock jack.
Mind's Mirrors is offline  
post #4 of 7 (permalink) Old 09-10-2007, 10:01 PM
 
Join Date: Jan 2005
Location: Canberra, Australia
Posts: 9,198
Reviews: 120
Re: EMG Install - Output Jack

Quote:
Originally Posted by Mind's Mirrors View Post
In the middle of installing an 81-7 in my RG7620. Only problem is that the output jack that comes with the EMG is too short.

Can you use the stock barrel type jack that is stock on the RG7620..or are there other ways of making the EMG jack fit?

Also if you use the stocker that has a white a bare wire soldered to it...whats the equivalent wires on the EMG to attach to solder to the posts?
If it's the stereo output jack On the Ibanez then you should be able to use it I think.
LonePhantom is offline  
post #5 of 7 (permalink) Old 09-11-2007, 11:07 AM
 
Join Date: Feb 2006
Posts: 66
Re: EMG Install - Output Jack

yeah you can use the stock ibanez barrel stereo jack
DBDbadreligion is offline  
post #6 of 7 (permalink) Old 09-14-2007, 08:03 AM
 
Join Date: Sep 2006
Posts: 20
Re: EMG Install - Output Jack

From and email from the EMG tech guys, when I asked them teh same question.

"You can use the existing jack, as long as it has 3 terminals. The black
wire from the battery clip goes to the ring terminal."

Worked out fine for me.
jarrett is offline  
post #7 of 7 (permalink) Old 09-14-2007, 12:41 PM
 
Join Date: May 2007
Posts: 637
Re: EMG Install - Output Jack

Quote:
Originally Posted by Mind's Mirrors View Post
I appreciate it..

02camaroz28 (at) comcast (dot) net

Ill give it a go with the stock jack.
once u get his email, delete this post. u don't wnat ur email wandering around the internet
yoyo1299 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Jem 77FP output jack - white wire is not soldered robbie_down_under Pickups & wiring 0 06-27-2007 02:39 AM
Output Jack messed up? AKMG All Other Guitars (including Prestige) 7 02-07-2007 09:37 PM
Output jack flaked out moro Tech: Setup, Repairs and Mods 7 07-16-2006 10:56 AM
help wiring an output jack on my 77dbk prefontainenike Pickups & wiring 1 12-22-2005 05:33 PM
help on wiring active pickups to emg battery/output jack live4love Pickups & wiring 1 02-03-2003 04:10 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome