Ibanez RG 1527 top lock - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 06-23-2004, 09:52 PM Thread Starter
 
Join Date: Jun 2004
Posts: 5
Ibanez RG 1527 top lock

Hi there, this is my first message, I've just entered the forum and I am truly amazed with all this cool information.
Well my problem is I bought a new RG 1527 but from the first day (yes, it's FIRST DAY!!!) the pressure pads for the 6 and 7th strings were like loose.
I, stupidy, tightened it more than I should and it got screwed up.
The thing is this part (I dunno its name, it's where the pressure pads are put, the part in direct contact with the strings and where the screw holes are) got somehow wider and it won't secure the strings... I solved the problem by putting another, thinner pressure pad so that the bottom part of the damaged part could hold it but it doesn't look that good.
please tell me how can I fix it or where to get Ibanez parts (I've looked in lots of places but it seems that pice is not sold)

THANX IN ADVANCE


By the way, how can I put a picture in my message? (to show you what part)
[img][/img]
Mono is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 06-23-2004, 10:21 PM
Vendor
 
Rich's Avatar
 
Join Date: Dec 2000
Location: South Jersey
Posts: 25,619
I'm guessing you mean you stripped the nut base [or it was already stripped when you bought it, which isn't that uncommon]. You're under warranty dude, the fix is as close as your dealer/distributor.
Rich is offline  
post #3 of 4 (permalink) Old 06-25-2004, 09:43 PM Thread Starter
 
Join Date: Jun 2004
Posts: 5
Thanx, the main problem is that I live in Ecuador and they do not support foreign countries, yes, it came wrong from the factory so I could claim my warranty but looking for the piece suits my case best because I coul fix it without sending my guitar overseas.
Any suggestions??? please
Mono is offline  
post #4 of 4 (permalink) Old 06-25-2004, 09:46 PM
Vendor
 
Rich's Avatar
 
Join Date: Dec 2000
Location: South Jersey
Posts: 25,619
Considerring list price on the nut is $115 I'd send just the nut in and have it replaced. No reason they should require you to send the whole guitar back [but then again, they might].
Rich is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Ibanez 1527 BP - 2003 VexHead All Other Guitars (including Prestige) 15 04-29-2012 04:03 PM
Replacing Dimarzio Clip Lock With Dunlop Strap Lock EEF13 Gear, Equipment, Recording & Off Topic 3 12-20-2011 06:51 AM
FS/FT: Ibanez RG 1527 body 10 of 10 [email protected] Classified Ads: Guitars and Gear 1 03-08-2008 04:26 AM
WTT Ibanez Rg 1527! Eddie_UV777 Classified Ads: Guitars and Gear 26 06-04-2006 10:38 PM
Ibanez RG 1527 CB 7stringer Classified Ads: Guitars and Gear 2 06-21-2005 10:33 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome