Ok well mine would fall somewhere between the early JEMs/ RGs and the super strats tha charvel make for Eddie Van Halen and Warren DeMartini.
Body- JEM style (or if breaking the copyright laws, RG- no monkey grip but with routing simmilar to a lions claw)
AANJ
one humbucking pickup- Evo, Breed or PAF Pro, one volume control.
Bridge- Lo Pro Edge
Neck- 24 fret maple neck with bubinga reinforcement stripe
fretboard- maple
inlay- "zig zag": like a vine, only sharp angles. bigger waves over key frets
Finishes- Red, white and black swirl, GMC swirl and the three 777 neons

That would be my ultimate guitar!

and by the way- that is probably the best DNA i have ever seen! it looks like DNA+ stars swirl= space age DNA!?!

Well had a mess about on the web with the guitar design thing, came up with these 2





CJM 1/2
Body: Basswood with Flame maple cap
Neck: Superwizard with blank ebony board side markers only.
Bridge: Lo Pro Edge
Pickups: Direct mount Dimarzio Evolution Bridge/Paf Pro neck (Hand wired by Tony Blair)
Electronics: 1 Volume, 1 Tone push pull pot for coil tap, 3 way toggle.
Jack input recessed as in Jem/JS.
Gotoh tuners
Dimarzio strap locks and pots

EDIT* The pots and switch are meant to be in the same place as the 1st one, didnt notice i'd messed them on the 2nd

6 and 7 string models
25-1/2" scale
All Access Neck Joint
Body cutaways like Jem, but body 1" thicker.Also would like a Jem style body, but single cut away.
24 frets
Mahogany body with Quilted Maple Top.Would also like a non quilted one with graphic of Ninja Gaiden on top.
Clear Pickguard.
Ebony and Birdseye Maple Fingerboard options
Birdseye maple neck
HSH pickup configuration.Dimarzio Steve Morse in Neck, class of '55 in middle Fred in Bridge.
Humbuckers each coil tapped with one switch
Tone knob much closer to volume knob, and has fast roll off
Wilkinson trem w/piezo
Locking tuners
Compensated nut
Octavia built into electronics, accessible via mix knob.

Mines real easy.
First:
Ibanez RG 7
Mahogany body w/ flamed maple top
5 Piece baritone scale neck, rosewood board, bound neck and headstock
Edge Lo Pro 7 tremolo-black
1 humbucker in bridge position. either a lundgren m7 or duncan invader
See through green finish with a satin clear coat
Input jack on the side like on the Universe 7 strings

Hmmm come to think of it Im haivng this built this summer.

the andy timmons except with a binding around the body, 24 frets, and a diff colour

http://i106.photobucket.com/albums/m260/Dom5412/RG.jpg

Something like that. Ash body though.

Hand-wired by Tony Blair? I think he might be a bit too busy to do that sort of thing. Sure would make for an expensive one-off guitar, though...

Nah, looks like he's gonna have a lot more free time on his hands now. The real challenge is get your guitar painted by the guy who did jesus on the ceiling.

Anything from Ed Roman or Zachary guitars. LOL.

Specifications

Construction: Neck-through-body, with one-piece maple top
Scale length: 27.0” (tuned F# B E A D G B E)
Body Wings: Swamp ash
Shape: Infinity archtop with semi-contoured back, and deep-cut, chamfered cutaways
Neck: Infinity 8, 5-piece maple/walnut neck, with Wizard II-8 profile
Fingerboard: 430 mm radius, body-matched AAA quilt maple on models with transparent finishes, ebony on standard black
Inlays: Offset ellipse fret markers
Frets: 24, 6100 extra jumbo nickel
Headstock: Infinity 8 reverse, 15-degree tilt back (with body-matched AAA quilt maple veneer on models with transparent finishes)
Bridge: Edge Pro 8, with installable tremolo block
Nut: Toplok 8, with string retainer bar
Tuning Machines: Gotoh, 4 per side
Bridge Pickup: EMG 808
Neck Pickup: EMG 808
Controls: 3-way pickup selector, volume, and tone knob


Available Finishes

QTK = Transparent black over maple quilt / cosmo black hardware / mother-of-pearl inlays
QTC = Transparent crimson over maple quilt / cosmo black hardware / mother of pearl inlays
QTW = Whitewash over maple quilt / with satin nickel hardware / black pearloid inlays
BK = Standard black with ebony fingerboard / with standard black hardware / mother of pearl inlays

...and it still looks friggen' awesome... you should go with matching maple on the headstock though, and some black Japanese calligraphy for inlays.

nice!!

Would be a seven string version.

Hahahahah
Adam02 is a god.


"Not that guitar noob, but that guy who painted those jesuses on that ceiling"

Nice to see some people being original here.

Why be just like Steve and play a JEM when you can get something to make YOUR signature stand out?