LTD MH-400 Bridge question - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 12-08-2014, 05:21 PM Thread Starter
Join Date: Jul 2010
Location: USA
Posts: 4
LTD MH-400 Bridge question

The LTD MH-400 has a licensed floyd rose bridge. The bridge itself is pretty decent, but I have a minor problem with the arm. There's a very very tiny spot in the center where there's no tension, so when diving and pulling up the change in pitch isn't completely smooth - there's this little 'pause' in the pitch change.

I was thinking maybe a push-in arm would solve the problem rather than swapping out the whole bridge, but wanted to see if anyone here has ever faced a similar problem?
Yuma and the Jellyfish is offline  
Sponsored Links
post #2 of 2 (permalink) Old 12-09-2014, 11:49 AM
Join Date: Jul 2008
Location: UK
Posts: 1,641
Re: LTD MH-400 Bridge question

This has been a problem with every bridge I've ever used except for the wilkinson type with the grub screw tension adjuster.

I believe the Gotoh Floyd roses also have this method. (As do the Graphtech LB63s), but I don't think there's a proper solution other than upgrading to once of the aforementioned bridges.

You can torque the **** out of the allen key on the bottom of the arm holder, and hammer down the tension adjuster to get it to work properly, but in my experience, the rotation of the bar in the holder will cause one or both to work loose eventually, and the problem with return.


I've owned 3 guitars with ZR bridges, changed one holder for a floyd holder, the other for a machined metal holder from Doobiz on youtube, and I've 2 guitars with OE bridges. Friends with Edge Pros, and tested a few EZ bridges here and there.
GuitarBizarre is offline  

floyd rose

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bridge question? guitardude67 All Other Guitars (including Prestige) 13 09-27-2006 03:59 PM
zr bridge question gohammygo Tech: Setup, Repairs and Mods 9 01-23-2006 05:32 PM
Bridge Question... shredded All Other Guitars (including Prestige) 2 09-08-2005 01:24 AM
Another Bridge Question dragsternj All Other Guitars (including Prestige) 5 05-11-2005 02:20 AM
bridge question? woodros Tech: Setup, Repairs and Mods 3 10-09-2003 05:51 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome