Need a builder for an Ibanez Replica - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 54 (permalink) Old 08-07-2007, 03:43 AM Thread Starter
 
Join Date: Jun 2007
Posts: 27
Need a builder for an Ibanez Replica

Yeah right!

Wanna know the specs?

Neck :

-Scale 25.5, bolt-on or neckthrough (depending on the price)
-Maple,satin clear finish (maybe with reinforcements)
-24 frets
-Thin Dunlop fretwire to minimize fretbuzz (I use thick strings)
--Ibanez 7 headstock, Reversed, with traditionnal Tilt and angle, a Logo on front
-Satin finish, DARK red (maybe with satin black binding)
-Graphite nut or Earvana
-Gotoh tuners, Black/Black Nickel
-Ebony Fretboard (maybe with satin black binding)
-No markers on fretboard, only on side

Body :

-RGA-7 (RG archtop), maybe 5% smaller
-Alder
-Left Horn as pointy as the lower one
-Finish matching with the headstock
-Seymour Duncan Blackout7 active pickups (EMG sized), Bridge and Neck
-TonePros Tune-o-matic bridge or other strings thru body design, Black/Black Nickel
-1x Volume pot, Black/Black Nickel
-3 way switch
-Recessed jack input

Those are the main specs.

Shoot me ANY contact you have seriously. I never thought it would be so hard to have an Ibanez Replica built.

I already emailed :
EKG guitars, without answer
LGM guitars without answer
SIMS custom shop, without answer

Thanks
Scarve is offline  
Sponsored Links
Advertisement
 
post #2 of 54 (permalink) Old 08-07-2007, 04:58 AM
 
Join Date: Feb 2004
Posts: 1,398
Re: Need a builder for an Ibanez Replica

Chris Woods..?
dannymills is offline  
post #3 of 54 (permalink) Old 08-07-2007, 04:58 AM
 
Join Date: Feb 2004
Posts: 1,398
Re: Need a builder for an Ibanez Replica

Legacy One
dannymills is offline  
post #4 of 54 (permalink) Old 08-07-2007, 04:59 AM
 
Join Date: Feb 2004
Posts: 1,398
Re: Need a builder for an Ibanez Replica

Actually, Chris Woods has done some 7 string RGAs or something... check him out for sure.
dannymills is offline  
post #5 of 54 (permalink) Old 08-07-2007, 04:22 PM Thread Starter
 
Join Date: Jun 2007
Posts: 27
Re: Need a builder for an Ibanez Replica

Yeah I heard good stuff from Chris's work too. But importing from UK wouldn't be at great deal at all for me...

I pm'd Legacy one for quotes
Scarve is offline  
post #6 of 54 (permalink) Old 08-07-2007, 07:16 PM
 
Join Date: Jan 2006
Location: Athens, Greece
Posts: 597
Re: Need a builder for an Ibanez Replica

You should check this guy

http://www.lootnick.com/gallery.php

He's in Polland, so I guess there won't be a huge import cost and a far as I can judge from the pics, his job is great!
Aris_T is offline  
post #7 of 54 (permalink) Old 08-07-2007, 07:20 PM
 
Join Date: Jan 2005
Location: Canberra, Australia
Posts: 9,208
Reviews: 120
Re: Need a builder for an Ibanez Replica

Quote:
Originally Posted by Scarve View Post
Yeah I heard good stuff from Chris's work too. But importing from UK wouldn't be at great deal at all for me...

I pm'd Legacy one for quotes
Dude, you DON'T want to deal with Legacy One. There is a massive thread dedicated to people venting their frustration with Legacy One's sub-par quality parts, and that's only if they are able to get them. Many have paid and ended up with nothing. Do not go anywhere near Legacy One unless you really like giving money away for fun.
LonePhantom is offline  
post #8 of 54 (permalink) Old 08-08-2007, 03:04 AM Thread Starter
 
Join Date: Jun 2007
Posts: 27
Re: Need a builder for an Ibanez Replica

Quote:
Originally Posted by LonePhantom View Post
Dude, you DON'T want to deal with Legacy One. There is a massive thread dedicated to people venting their frustration with Legacy One's sub-par quality parts, and that's only if they are able to get them. Many have paid and ended up with nothing. Do not go anywhere near Legacy One unless you really like giving money away for fun.
DAMN! hahha

**** man, I am ****ing going to get my replica built or what?
Scarve is offline  
post #9 of 54 (permalink) Old 08-08-2007, 05:15 AM
 
Join Date: Jan 2006
Location: Athens, Greece
Posts: 597
Re: Need a builder for an Ibanez Replica

Quote:
Originally Posted by Scarve View Post
DAMN! hahha

**** man, I am ****ing going to get my replica built or what?
http://www.lootnick.com/gallery.php
Aris_T is offline  
post #10 of 54 (permalink) Old 08-08-2007, 06:48 AM
 
Join Date: May 2006
Location: Montréal, Québec
Posts: 149
Cool Re: Need a builder for an Ibanez Replica

HI!

Aucun luthiers a montreal veulent le faire???

MF, Liberatore, SD......???
modulo is offline  
post #11 of 54 (permalink) Old 08-08-2007, 07:33 AM
 
Join Date: Feb 2004
Posts: 1,398
Re: Need a builder for an Ibanez Replica

Quote:
Originally Posted by Scarve View Post
Yeah I heard good stuff from Chris's work too. But importing from UK wouldn't be at great deal at all for me...
He's based in the US....

I said Legacy One as a joke .
dannymills is offline  
post #12 of 54 (permalink) Old 08-08-2007, 12:24 PM Thread Starter
 
Join Date: Jun 2007
Posts: 27
Re: Need a builder for an Ibanez Replica

Really? US based? I thought He was in the UK. Then things change a little bit.
Scarve is offline  
post #13 of 54 (permalink) Old 08-08-2007, 12:27 PM Thread Starter
 
Join Date: Jun 2007
Posts: 27
Re: Need a builder for an Ibanez Replica

Quote:
Originally Posted by modulo View Post
HI!

Aucun luthiers a montreal veulent le faire???

MF, Liberatore, SD......???

En fait Stephane Denis ne fait pas de fabrication pour cause de manque de temps. Mais si j'achète des pièces, il est game pour l'assemblage.

MF et Liberatore vont me charger une caliss de beurrée pour rien. J'préfèrerais ultimement y aller avec un body fait par CNC, qui est pas supposé coûter ben cher, et un neck comme jle veux, l'assembler, poser les pickups et hardware pis faire le vernissage ici même.
Scarve is offline  
post #14 of 54 (permalink) Old 08-08-2007, 03:09 PM
 
Join Date: Jan 2005
Location: Guatemala
Posts: 1,084
Reviews: 1
Re: Need a builder for an Ibanez Replica

i dont know if interest you but i have a person here in guatemala... but the overseas thing might be a little problem.... jajaja anyways here is the link if you have a question or two http://www.iglesiasguitars.com/instruments.html
Ironjose is offline  
post #15 of 54 (permalink) Old 08-08-2007, 03:10 PM
 
Join Date: Jan 2005
Location: Guatemala
Posts: 1,084
Reviews: 1
Re: Need a builder for an Ibanez Replica

what i need is a blueprint of a 7string RG... or UV... where can i get it?
Ironjose is offline  
Reply

Tags
basswood body , chris woods , christopher woods , custom shop , ebony fretboard , ekg guitars , gotoh tuners , graphite nut , guitar shop , jaden rose , jeff loomis , lgm guitars , maple fret , maple fretboard , matic bridge , neck plate , pickup wiring , playing guitar , reversed headstock , seymour duncan , sims custom , sims custom shop , string necks , swamp ash , tremolo cavity

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
how many Ibanez guitars do you own? spacenuke All Other Guitars (including Prestige) 1687 09-19-2015 09:15 PM
Tell us about you guitar setup/rig Everyone!!! GuitarWizard Gear, Equipment, Recording & Off Topic 623 03-28-2013 07:41 PM
Ibanez clinic tour. Ibanez-Mag All Other Guitars (including Prestige) 15 10-17-2006 05:10 AM
for trade , ibanez usrg30 j.arledge Classified Ads: Guitars and Gear 2 03-07-2006 10:14 PM
Recommend me a builder of custombody to fit w/ Ibanez parts? freewheeler Tech: Setup, Repairs and Mods 10 10-04-2002 03:59 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome