OFR into Edge Pro II - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 08-29-2004, 03:53 PM Thread Starter
Join Date: Aug 2004
Posts: 14
OFR into Edge Pro II

Hey everyone. It's my first post here and I was wondering if an Original Floyd Rose, or other Floyd Rose bridges, will retrofit the Edge Pro II on my RG 320 FM. I know it can retrofit a TRS, but I'm not sure about the Edge Pro II. Thanks.
Dan 320 FM is offline  
Sponsored Links
post #2 of 4 (permalink) Old 08-29-2004, 04:41 PM
Join Date: Apr 2001
Location: Minneapolis MN
Posts: 1,056
Even if the post spacing was the same for OFR and Edge Pro 2 you'd have to replace the bushings and studs. With TRS that wasn't the case because those trems used a stud that very much like a OFR stud.
From what I've read around here there is no retofitting anything with these new IBZ trems. I believe part of it is the distance from the nut. These new EP/EP2 are a different distance from the nut than previous trems. And old trems (even if the post spacing is the same which i don't know) would have intonation troubles.
CrossingStar is offline  
post #3 of 4 (permalink) Old 08-29-2004, 05:39 PM Thread Starter
Join Date: Aug 2004
Posts: 14
Well, I guess uprading my guitar is out of the question then. I'll just have to wait to buy new RG Prestige or maybe a used RG with an Edge/ Lo-Pro.
Thanks anyways.
Dan 320 FM is offline  
post #4 of 4 (permalink) Old 08-30-2004, 11:07 PM
Join Date: May 2004
Posts: 1,006
Yeah man, check the classifieds here on the forum. The 540 Radius series and RG 5** series pop up for between 300-400 a lot.

I would go that way. :P
Kontalonis is offline  

floyd rose , floyd rose bridge

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTT: Edge/Lo-Pro Edge Whammy bar for Edge III (black) GuitarAl96 Classified Ads: Guitars and Gear 0 07-25-2013 11:30 AM
WTB: square heel neck and edge/lopro edge needed nafigator Classified Ads: Guitars and Gear 0 03-27-2011 06:41 PM
LF: Lo-Pro Edge, Edge Pro or Edge Pro II in Madrid Spain kevlahnota Classified Ads: Guitars and Gear 2 03-24-2010 12:40 PM
WTB: Ibanez edge/LP edge/edge pro saddle mounting screws Ratit Classified Ads: Guitars and Gear 0 04-18-2009 09:16 PM
Replace Edge Pro With Edge/ Lo-pro Edge Trem Vaistarr Tech: Setup, Repairs and Mods 28 04-01-2008 01:18 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome