RG with JPM neck - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 10-18-2004, 04:43 AM Thread Starter
 
Join Date: Apr 2002
Location: Turkiye/Eskisehir
Posts: 739
RG with JPM neck

i remember that i have seen a two humbuckered RG model guitar which has JPM neck.but i dont remember which RG this was...
anyone seen this RG or anyone know?

may it be RG470???
nienturi is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 10-18-2004, 11:43 AM
 
Join Date: Jul 2002
Location: Melbourne, Australia
Posts: 237
RG3120
beyblade is offline  
post #3 of 9 (permalink) Old 10-18-2004, 02:00 PM
 
Join Date: Aug 2003
Posts: 157


are you sure???
the 3120 should come with a wizard...I think the JPM neck is thicker
machinediva is offline  
post #4 of 9 (permalink) Old 10-18-2004, 02:21 PM
 
Join Date: Jul 2002
Location: Argentina
Posts: 2,221
Quote:
Originally Posted by machinediva


are you sure???
the 3120 should come with a wizard...I think the JPM neck is thicker
Yeah i traded my 3120 for a JPM, and the JPM definetly feels "beefier"...
marianozz is offline  
post #5 of 9 (permalink) Old 10-19-2004, 03:28 AM Thread Starter
 
Join Date: Apr 2002
Location: Turkiye/Eskisehir
Posts: 739
really???
are you sure that if it is not a custom made or modified model???
nienturi is offline  
post #6 of 9 (permalink) Old 10-19-2004, 04:13 AM
 
Join Date: Dec 2000
Location: Daytona, FL
Posts: 1,917
JPM's came with the 'viper' profile I think, completely different from the 'Wizard' on a 3120. The Viper is thicker front to back with a smaller nut width.

There were a couple Japanese-market-only guitars with the JPM neck profile right after JP left Ibanez. Dunno if they're stilol making them or not.

Neither the RG470, nor 3120 is the same neck.
toshiro is offline  
post #7 of 9 (permalink) Old 10-19-2004, 05:11 PM
 
Join Date: Mar 2001
Location: Va Beach, VA
Posts: 1,416
The Ultra profile that is available on some of the JC models is as close as your going to get I believe, but it is still 43mm vs. 42mm in width at the nut. And it's not quite as beefy as the JPM, but more so than a wizard.
Gresh is offline  
post #8 of 9 (permalink) Old 10-22-2004, 05:25 AM
 
Join Date: Jan 2004
Posts: 63
I think the Rg 2820 has a jpm neck. If it's not, it's very similar. The width is 42 mm, not shure about the thickness
pr0cyon is offline  
post #9 of 9 (permalink) Old 10-22-2004, 03:41 PM
 
Join Date: Dec 2001
Location: Phoenix, AZ
Posts: 280
The guitars I know that either have the same neck or similar neck and 2 hum configuration would be the JCRG-3, RG8520 (pre-2004), RG1802, USRG30, and a very small number of UCEW1FM's. You can go to www.ibanezregister.com and check out photos of all of the guitars I mentioned as well as ones that you might think it is, I am sure you will be able to identify what you were thinking of there.
Soloist is offline  
Reply

Tags
jpm neck

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Richie Kotzen's Electric Joy neck pickup, Ibz RBM pickguard & 1966 Fender Neck Plate mayzan Classified Ads: Guitars and Gear 0 11-30-2010 10:04 AM
FS: RG550 Maple neck/Edge Trem, Jackson neck, Dimarzio pups NickCormier Classified Ads: Guitars and Gear 10 01-08-2010 12:46 PM
Flamed jackson neck, birdseye musikraft neck, loaded strat body shesky Classified Ads: Guitars and Gear 2 04-30-2009 06:02 PM
SWAP: Jem neck 77FP tree of life and floral head for 777DY pyramid neck blitzmark1 Classified Ads: Guitars and Gear 2 03-19-2009 06:41 PM
ok, ibanez switch H-H, pos1 = neck(hum mode) pos2 =neck(Inner Coil only) 7-request Pickups & wiring 2 07-05-2005 11:18 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome