RG neck repleacement - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 04-23-2004, 10:00 PM Thread Starter
Join Date: May 2003
Location: Brooklyn, NY
Posts: 328
RG neck repleacement

I have an RG 570 that I would like to change the neck on. It's from 1989, and has a really thin neck. I would like something with al ittle more of a round radius, and something a little thicker. Something like the neck on my S2120 prestige would be awesome. Can any of you guys think of anything that would be similar, and compatible?

IbanezPrestigeBoy is offline  
Sponsored Links
post #2 of 6 (permalink) Old 04-23-2004, 10:06 PM
Join Date: Dec 2000
Location: Daytona, FL
Posts: 1,917
Warmoth neck with the 24 fret extension should fit no problem. Just won't have an Ibanez headstock anymore..

LGM and EKG also make custom necks, I believe(links in the banner)..
toshiro is offline  
post #3 of 6 (permalink) Old 04-24-2004, 01:13 AM
Join Date: May 2001
Posts: 306
You could take the Wizard II neck off an old RG470 or something.
bachle7 is offline  
post #4 of 6 (permalink) Old 04-24-2004, 04:05 AM
Join Date: Dec 2000
Location: Daytona, FL
Posts: 1,917
AFAIK, there aren't any Wizard II necks with the old heel joint, RG470's back in the old days(1993) can with Orig. Wizard necks..
toshiro is offline  
post #5 of 6 (permalink) Old 04-24-2004, 05:58 AM
Join Date: Jun 2002
Location: Berlin, Germany
Posts: 663
Hmm.. the 2120 has an ultra neck.

For a similar neck with the old joint, you ould try to get ahold of an old radius neck.. but that way you'd sacrifice frets 23-24. Maybe warmoth necks are indeed the best option.

Edit: Or you could *try* and get an old jem neck. AFAIK, those have pretty wizardII-ish dimensions.
horstausmforst is offline  
post #6 of 6 (permalink) Old 04-24-2004, 04:43 PM
Join Date: May 2001
Posts: 306
Thanks toshiro, I missed the "1989" part! I also find the Wizard neck too thin for me. I'm looking for a Wizard II neck from an RG DX series guitar to build a custom guitar myself!
bachle7 is offline  

custom guitar , custom necks , jem neck , warmoth neck

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: LOCAL DEAL(MPLS MN)- Lot of Ibanez RG550 parts, neck, body and Roadstar neck CrossingStar Classified Ads: Guitars and Gear 3 06-10-2011 07:24 PM
FS: RG550 Maple neck/Edge Trem, Jackson neck, Dimarzio pups NickCormier Classified Ads: Guitars and Gear 10 01-08-2010 12:46 PM
Flamed jackson neck, birdseye musikraft neck, loaded strat body shesky Classified Ads: Guitars and Gear 2 04-30-2009 06:02 PM
SWAP: Jem neck 77FP tree of life and floral head for 777DY pyramid neck blitzmark1 Classified Ads: Guitars and Gear 2 03-19-2009 06:41 PM
ok, ibanez switch H-H, pos1 = neck(hum mode) pos2 =neck(Inner Coil only) 7-request Pickups & wiring 2 07-05-2005 11:18 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome