RG321 MH - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 05-19-2011, 10:08 PM Thread Starter
 
Join Date: May 2011
Location: ocean county nj
Posts: 7
RG321 MH

I just picked up an RG 321 MH for $100. Want to use the neck for a Destroyer/Iceman Hybrid. The thing is my younger son likes it and now I'm stuck looking for another neck. Regarding the screws. I see Ibanez rules has 36 & 40 MM screws with grommets. I know there are 4 screws. How many of each size do I need? Is it two each? Or is it (3) 36 mm and (1) 40 mm? I don't want to take the neck off the 321 to find out.

By the way, this neck plays nice!

Thanks in advance.

SteveO (from Jersey)
steveo64_destroyer is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 05-19-2011, 10:28 PM
 
Join Date: Oct 2009
Location: Georgia, USA
Posts: 2,878
Reviews: 4
Re: RG321 MH

Two of each, the set does the job it needs. I am not sure whether or not it applies for the tilt joint ones from the early RGs. but i'm 99% sure it is fine for most AANJ necks.
fwd0120 is offline  
post #3 of 7 (permalink) Old 05-20-2011, 10:19 AM Thread Starter
 
Join Date: May 2011
Location: ocean county nj
Posts: 7
Re: RG321 MH

Thanks, fwd0120.

I'll check with Rich at IR.

SteveO
steveo64_destroyer is offline  
post #4 of 7 (permalink) Old 05-20-2011, 11:44 AM
 
Join Date: Oct 2007
Location: The FTL, Florida
Posts: 4,366
Reviews: 21
Re: RG321 MH

The Iceman / Destroyer neck joint isn't the same as the RG in terms of hole spacing I believe.
If you're getting one of those CNC'ed hybrid bodies off the internet I'd be sure to ask about the hole spacing and if it will allow a standard RG neck to fit the pocket. Most look like they do, though.
My apologies in advance if you knew this already.
Good luck!
mike570 is offline  
post #5 of 7 (permalink) Old 05-20-2011, 11:50 AM Thread Starter
 
Join Date: May 2011
Location: ocean county nj
Posts: 7
Re: RG321 MH

Thanks, Mike.

The evilbay ad says:
[FONT=Arial]Neck compatibility.......Fits standard Ibanez 24 fret RG wizard I/II necks

So I built my search around that. The RG321 had a Wizard II neck.

I think I'm good to go.

Regards,

SteveO
[/FONT]
steveo64_destroyer is offline  
post #6 of 7 (permalink) Old 05-20-2011, 11:54 AM Thread Starter
 
Join Date: May 2011
Location: ocean county nj
Posts: 7
Re: RG321 MH

According to Rich at IR, It seems the 36 MM screws are discontinued.

Anyone on here have a set? Or know of any alternatives?

SteveO
steveo64_destroyer is offline  
post #7 of 7 (permalink) Old 05-20-2011, 12:20 PM
 
Join Date: Jan 2011
Location: baton rouge
Posts: 3,922
Reviews: 11
Re: RG321 MH

Quote:
Originally Posted by steveo64_destroyer View Post
According to Rich at IR, It seems the 36 MM screws are discontinued.

Anyone on here have a set? Or know of any alternatives?

SteveO

Yeah. Lowes. Home Depot. Ace. Menards. What have you. 1 5/16" screws.
linuxpenguin is offline  
Reply

Tags
neck , rg 321 mh , rg neck , screws

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Who has a RG321? Thrash All Other Guitars (including Prestige) 8 08-03-2011 07:23 AM
WTB: RG321 newbieguitarmaker Classified Ads: Guitars and Gear 1 07-18-2009 11:26 PM
Help with RG321 Mod valdex All Other Guitars (including Prestige) 8 12-27-2006 01:00 PM
FS Rg321 MOB amd1.1 Classified Ads: Guitars and Gear 1 10-23-2005 03:21 PM
wtb a rg321 or 421 ibanezrg520kid Classified Ads: Guitars and Gear 7 10-22-2005 11:39 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome