Small mod questions
I'm using a 2 throw switch -- on/on, I guess.
However, I simply connected the wires which originally went to the tone pot to the switch on one side, and left the other side open. *When the open side is selected, you have sound. *When the other side is selected, it shorts out the whole guitar and kills all signal.
When I wired it up at first, I cut wire to the output jack and spliced the switch in between. *However, in this configuration I got a little bit of bleed-thru when it was supposed to be turned off.
As for selecting pickups, I'm still using the stock 5-way. *I'm not sure about how you'd wire the three-way toggle to select pickups.