USRG Part Needed - Please Help! - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 05-02-2006, 12:25 AM Thread Starter
 
Join Date: Feb 2006
Posts: 13
Question USRG Part Needed - Please Help!

Hey there all!!! I'm hoping that somebody out there might just happen to have one of the plates that the locking nut mounts to on a USRG30 (tension free) neck? It's approx 22mm x 10mm with 3 holes in it - one to mount it to the neck 'bar' and two to mount the locking nut to it. Before I go to the trouble of fabricating one, I figured that I'd ask!!!
Steve Brand is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 05-02-2006, 09:11 AM
 
Join Date: Dec 2003
Posts: 477
Re: USRG Part Needed - Please Help!

Email Bunker guitars. They're probably you're best chance of getting one. --Jason

http://www.bunker-guitars.com/
jkahrs is offline  
post #3 of 6 (permalink) Old 05-02-2006, 02:49 PM Thread Starter
 
Join Date: Feb 2006
Posts: 13
Re: USRG Part Needed - Please Help!

Thanks for the suggestion...I guess that I should have mentioned already having tried that approach and have also been in touch with Jim Donahue & Dave Bunker to see if those guys had one. No luck so far.....
Steve Brand is offline  
post #4 of 6 (permalink) Old 05-02-2006, 10:12 PM
 
Join Date: Dec 2003
Posts: 477
Re: USRG Part Needed - Please Help!

So Bunker didn't have one? That's strange. I would have guessed that piece would be common to all his tension free necks that use a lock nut. That's probably going to be a difficult piece to track down. --Jason
jkahrs is offline  
post #5 of 6 (permalink) Old 05-03-2006, 11:56 PM
 
Join Date: Nov 2001
Location: VA
Posts: 2,150
Re: USRG Part Needed - Please Help!

Try Treker guitars. According to Dave Bunker, his son runs Treker and has taken over all the Ibanez tension free stuff. They can build you a complete factory-style neck if you want. www.trekerguitars.com
TAorama is offline  
post #6 of 6 (permalink) Old 05-09-2006, 04:12 PM Thread Starter
 
Join Date: Feb 2006
Posts: 13
Re: USRG Part Needed - Please Help!

Hey! Looks like that is going to be the solution...many thanks for the tip!!!
Steve Brand is offline  
Reply

Tags
jim donahue , lock nut , locking nut

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
USRG Series Tension Free™ Neck karmatronic All Other Guitars (including Prestige) 3 08-25-2005 09:41 AM
Replacement part problems. SV300 Comments to Ibanez 1 08-25-2003 01:31 PM
HELP needed! What DiMarzios to stick in my Ibanez USRG30??? SliderJeff Pickups & wiring 3 05-09-2003 01:02 AM
USRG 30 5 way switch dgbaker33 Pickups & wiring 4 09-27-2002 07:11 AM
Help with broken Jem! - Broken trem part Funeral9 Tech: Setup, Repairs and Mods 3 02-24-2002 12:06 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome