Why doesn't this neck fit my RG560? - Jemsite
All Other Guitars (including Prestige) Discussion about other Ibanez Guitars not covered in the above topics. Includes J-Custom, USA-Custom, Prestige subforum.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 11-19-2009, 11:49 PM Thread Starter
 
Join Date: Oct 2009
Posts: 7
Why doesn't this neck fit my RG560?

Not sure if this should go in repair section,but my original neck on my RG560 said 550R on the back and had the red letter A. I bought a replacement on the bay which says 550R with a red letter E. The low E side has a space in between the body and neck when the screws are tightened and it seems like it was wider cause it was tighter to fit in it can anybody explain?
Balthier is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 11-20-2009, 02:16 AM
Super Moderator
 
jono's Avatar
 
Join Date: Dec 2000
Location: England
Posts: 7,111
Reviews: 1
Re: Why doesn't this neck fit my RG560?

There was a change in the neck width fo the guitars, but I think that's post change to the AANJ, thus post RG560. Have you got years from the serial numbers maybe one of the more techy minded folks can help out.
jono is offline  
post #3 of 4 (permalink) Old 11-20-2009, 03:11 AM Thread Starter
 
Join Date: Oct 2009
Posts: 7
Re: Why doesn't this neck fit my RG560?

yeah my original one that fit great serial number is F734558 and the replacements that doesn't fit so great is F742969.
Balthier is offline  
post #4 of 4 (permalink) Old 11-20-2009, 05:06 AM
 
Join Date: Oct 2006
Location: overthere
Posts: 1,787
Re: Why doesn't this neck fit my RG560?

must fit.maybe its from a dry or wet place and then it wood works.i had try to get a neck of a guitar and it didnt work(unless i use a lot of force(no starwars)and a few weeks later the neck was easy to remove.maybe a little sanding will help too.
brianxtr is offline  
Reply

Tags
rg560

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
What are my options for RG560 neck? Balthier Tech: Setup, Repairs and Mods 2 11-09-2009 07:33 AM
WTB: square heel RG560 neck Balthier Classified Ads: Guitars and Gear 2 10-28-2009 07:00 AM
RG560 neck stamp Iceman24 All Other Guitars (including Prestige) 4 08-12-2008 10:39 PM
RG560 peter762033 All Other Guitars (including Prestige) 11 04-22-2008 11:15 AM
rg560 Ibanut All Other Guitars (including Prestige) 15 08-31-2006 07:20 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome