Edge pro touching to the pickguard - Jemsite
Tech: Setup, Repairs and Mods Guitar workbench discussion such as setup, repairs, mods, installing new parts and more.

LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 11-12-2004, 10:17 AM Thread Starter
Join Date: Nov 2004
Posts: 57
Edge pro touching to the pickguard

The corner of the edge pro touches the pickguard a little (not the tremolo arm side)
how can I solve it
the guitar is a new jem
I adjusted the bridge height only ( I lowered it a little bit)
then when I see it touching the pickguard I raised the upper side and lowered the lower side and vice versa but there is still a slight touch
the bridge angle seems ok (tightened the back screws about a quarter turn)
and exactly where I must look for checking the angle the sides of the bridge are nut parallel to the saddles
and is it ok if the bridge is bent forward a little

the action is medium about 2mm on low E and 1.7 mm on high E and there is no buzz
Stormcrow is offline  
Sponsored Links
post #2 of 3 (permalink) Old 11-12-2004, 10:45 AM
Rich's Avatar
Join Date: Dec 2000
Location: South Jersey
Posts: 25,714
Rich is online  
post #3 of 3 (permalink) Old 11-12-2004, 10:59 AM Thread Starter
Join Date: Nov 2004
Posts: 57
thanks when I first got the guitar it was not like this after I changed the biridge height it gets a contact in the corner
Stormcrow is offline  

bridge angle , tremolo arm

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pickguard edge polishing moonlight Tech: Setup, Repairs and Mods 3 08-06-2011 05:50 PM
edge 3 - lower strings touching fretboard thehungryhippo Tech: Setup, Repairs and Mods 6 01-12-2011 03:39 PM
Strings buzzing when not touching them... SomeDude49 All Other Guitars (including Prestige) 3 09-05-2007 06:17 AM
Touching up edge. gemm012 Tech: Setup, Repairs and Mods 11 07-11-2006 01:31 AM
Touching Up the Paint? lonewolf121188 Tech: Setup, Repairs and Mods 0 06-18-2006 06:32 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome