Edge Trem question
On my UCEW, the high E string is a bit towards the treble side of the neck. Close enough to the edge where sometimes I pull it off the edge. And this is most noticeable in the higher frets. I tried moving the neck a little bit but there isn't much play there. I did notice the trem knife edges aren't sitting in the middle of the anchor. Actually, the trem is a bit towards the treble side so I was wondering if it is safe to loosen up the strings and move the trem up towards the bass side. That would help center up the strings enough, but I don't know if this is an option. Are the knife edges held captive so they can't move side to side?