Edge Zero 2 Problem
I was gifted with a JEM77P, I have worked with a floating tremolo in the past but for some reason what I usually do when I change the strings hasn't worked out on this guitar.
I changed the strings one by one and tuned it up, checked the angle of the tremolo and adjusted it to level with the two springs in the back.
Changed the action a little as the low E seemed higher than usual, then retuned.
The problem is that the guitar now goes out of tune before I've even played it. I will tune the strings and by the time I've tuned the last one the rest have sharpened.
Any advice is appreciated.