OFR or Edge Pro to replace Edge 3 - Jemsite
Tech: Setup, Repairs and Mods Guitar workbench discussion such as setup, repairs, mods, installing new parts and more.

LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 02-23-2015, 10:38 PM Thread Starter
Join Date: Apr 2012
Location: Canada
Posts: 6
Smile OFR or Edge Pro to replace Edge 3

Hi there, Ive owned a Jem 555 for like 2 years now and although I love my Jem, even after I've tuned and intonated my guitar, if I do a couple of little dives, she goes out of tune. I was thinking on swapping out the Edge 3 thats in it for either an Edge Pro or an OFR. However, even though Ive read countless forum threads, ive heard the OFR will fit, and that it wont fit without modifications! I really dont want to buy a OFR just to find out that it wont fit. My Edge 3 is 34mm at the little wings that span the front of the bridge as where Ive seen 1 diagram on the internet state that the OFR was 39.5mm at this same point. Does anyone have any concrete evidence or reference that they can give me that verifies if the OFR will fit an Edge 3 cavity. It seems that most people do agree that the Edge Pro will fit the Edge 3 cavity, but Im really curious about the OFR. Btw I've seen that old list that charts out what tremolo will fit certain cavities... I need more to go on than that .Thanks for listening.....
beyondlimits1972 is offline  
Sponsored Links
post #2 of 4 (permalink) Old 02-24-2015, 12:03 AM
Join Date: Jan 2005
Location: Canberra, Australia
Posts: 9,231
Reviews: 120
Re: OFR or Edge Pro to replace Edge 3

There's a whole thread stickied at the top of this forum all about replacing the Edge III if you didn't see it already. It is stated in that thread (and others around this site) that the Edge Pro is a direct fit. Some have found that the OFR work, but those reports are inconsistent. Safest bet is Edge Pro.
LonePhantom is online  
post #3 of 4 (permalink) Old 02-24-2015, 07:40 AM Thread Starter
Join Date: Apr 2012
Location: Canada
Posts: 6
Smile Re: OFR or Edge Pro to replace Edge 3

Thanks for the reply LonePhantam. I've sifted through so many threads about the Edge 3; trying to find out without a doubt, which tremolo would just be a direct swap, without modifications. As you stated the threads that mentioned the OFR would be a direct swap were basically equalled with posts that stated the OFR would not without modifications. I recently found the dimensions on Google for the OFR and I would have to widen the top part of my Edge 3 cavity by at least 6mm in order for it to fit; not something I'm looking at getting into, not gonna chance ruining the finish! Looks like I'll be setting my sites for an Edge Pro! Thanks!
beyondlimits1972 is offline  
post #4 of 4 (permalink) Old 03-15-2016, 11:48 PM
Join Date: Mar 2016
Location: Australia
Posts: 9
Re: OFR or Edge Pro to replace Edge 3

I know im probably posting this in the wrong place but im desperate...

I have a left handed ibanez rg370dxl which came standard with an edge pro 2. The thing is old and worn and i lost the arm and want to upgrade to an origonal floyd rose. Being leftbhanded its been near imposible to find a replacement edge pro2.

I have bwen trying to find a definite answer to this age old quesrion, emailed several techs, and the companies themselves and no one can tell me for sure...
Can someone please please tell me if this will work (someone that has done it...there has to be someone)
I will post pictures if necessary.
U dont want to waste 300 bucks and this is my last resort.

Kind regards,

Pepe silvia is offline  

edge 3 , ibanez , jem 555 , ofr , tremolo

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replace Edge Zero ZPS3 to Lo pro Edge raflemos All Other Guitars (including Prestige) 12 06-14-2012 10:39 PM
Can I replace Jackson JT580 with Edge Pro or Edge III Tremolo? Izzyprad Tech: Setup, Repairs and Mods 11 05-04-2010 08:57 AM
Replace Edge-ZERO with Original-EDGE? SilverEra Tech: Setup, Repairs and Mods 7 06-25-2009 03:36 AM
Can you replace an edge trem with a LoPro Edge? - Is it poss Cycovision Tech: Setup, Repairs and Mods 7 05-16-2009 12:22 AM
Replace Edge Pro With Edge/ Lo-pro Edge Trem Vaistarr Tech: Setup, Repairs and Mods 28 04-01-2008 12:18 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome