Help identifying this tremolo - Jemsite
Gear, Equipment, Recording & Off Topic Gear, Equipment, and Recording discussed here. Amps, pedals, whatever.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 03-17-2017, 05:35 AM Thread Starter
 
Join Date: Mar 2017
Location: London
Posts: 7
Help identifying this tremolo

Hey fellas, I recently purchased a swirled jem body off ebay, it came loaded with EVO pup set and some sort of floating tremolo installed. However not sure exactly what tremolo this is. It has Ibanez branding on it, "Licensed Under Floyd Rose Pats." and also says "LITIAN CENIURY" on the block that sits in the cavity. Anyone know what this is? The plan is to install an OE tremolo in the body in place of this, however not sure if its compatible. Many thanks

Pictures below,

https://s14.postimg.org/vo283svy7/image.jpg
https://s28.postimg.org/fs8e8xwff/image.jpg
Halrey is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 03-22-2017, 05:10 AM Thread Starter
 
Join Date: Mar 2017
Location: London
Posts: 7
Re: Help identifying this tremolo

Bump. Can anyone help? Would it be easier to show you the guitar body/cavity to see if an Edge tremolo would be compatible/fit? Thanks guys
Halrey is offline  
post #3 of 4 (permalink) Old 03-22-2017, 05:28 AM
 
Join Date: Dec 2006
Location: Croatia
Posts: 503
Re: Help identifying this tremolo

Could be SLT 101, ILT1 or TRS,

If you asking for changing tremolo to edge or other,
cavity dimension is more important because, tremolo could be changed before, and present one doesn't have to be original from body.
peromucho7 is offline  
post #4 of 4 (permalink) Old 03-22-2017, 06:36 PM
 
Join Date: Jan 2005
Location: Canberra, Australia
Posts: 9,156
Reviews: 120
Re: Help identifying this tremolo

It does look to be a lower end Ibanez bridge. I wouldn't be surprised if an OFR or Gotoh would fit right in, but as previously mentioned, the cavity dimensions are the important part here. Measure that, and compare against dimensions of your preferred replacement bridge(s) and work from there.
LonePhantom is offline  
Reply

Tags
floyd , ibanez , project , rose , tremolo

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Identifying Ibanez Tremolo Jaylaggs Archived Topics and Common Questions 1 01-09-2014 04:47 AM
Wtb: jem back tremolo cavity plate and edge tremolo arm JemSearcher Classified Ads: Ibanez JEM/UV Guitars 0 01-26-2012 10:17 PM
Is the Edge-Zero II Tremolo a good tremolo system dburn42 All Other Guitars (including Prestige) 6 05-30-2011 10:12 AM
PRS tremolo vs. Floyd Rose pro tremolo bjamin86 Tech: Setup, Repairs and Mods 5 01-25-2010 09:27 AM
Help identifying tremolo "shim" part mr.death Tech: Setup, Repairs and Mods 14 02-26-2008 04:04 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome