Evolution bridge H into a JS100 - Jemsite
Pickups & wiring Discussion about pickup types, replacements, recomendations, switching, wiring diagrams and sustainer systems for ANY guitar, JEMs included.

 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 08-06-2003, 12:04 PM Thread Starter
 
Join Date: Aug 2003
Posts: 4
Evolution bridge H into a JS100

I'm trying to get the Evoltion pickup I've got in my old guitar into my JS100. I'm hoping that it'll give me the evo sound I like, but with the nice pickup splitting of the JS100.

I'm working from this wiring diagram:

http://www.geocities.com/SunsetStrip...ech/W97009.gif

which I found on the Ibanez JS site (cheers)

I'm having a bit of difficulty getting the wiring sorted in my head.. the evo has :


white )()()()()()()()( green
black )()()()()()()()( red


atm I just have the black and white together, the red hot, the green ground.

How can I get the evo in and working the the coil switch?
Uglifruit is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 08-06-2003, 07:33 PM Thread Starter
 
Join Date: Aug 2003
Posts: 4
ok, I think I got it sussed, I send the black and white together to the switch and the other side of the switch to earth, send the green and screen to earth and the red to signal.. that way I think when I switch it'll earth the midpoint of the coil and only give me signal from 1/2 .. otherwise it's earthed at one and and connected in series through both coils.... now i just gotta work out how to make sure I have the right phase.
Uglifruit is offline  
post #3 of 3 (permalink) Old 08-07-2003, 07:16 AM
 
Join Date: May 2003
Location: SWEDEN
Posts: 257
If it sounds very "thin" it is likely out of phase (thats showing up when you use 2 pick-upīs at the same time).

Then just try to switch the colours to: Black=Hot out, Green&Red to the splitswich and white and "bare" to ground...
that is how my JEM10TH is originally set up from the factory.

I tried after the diagrams but got too much treble, with a little bit less middle and "bottom", so i Switched back and now it seems a little bit better.....
JEM10th is offline  
Reply

Tags
wiring diagram

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).



Email Address:
OR

Log-in











Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
The best quality bridge for JS100 bingooen Ibanez JEM, UV, JS & Other Signature Models 9 03-05-2014 08:02 AM
FS: DiMarzio Evolution Bridge and Evolution Neck models waylay00 Classified Ads: Guitars and Gear 7 01-25-2009 11:49 AM
JS100 + DiMarzio Evolution ZeroDrift Ibanez JEM, UV, JS & Other Signature Models 13 01-28-2005 06:59 PM
Evolution Neck and Evolution Bridge burt777 Pickups & wiring 2 02-13-2003 08:28 AM
Evolution on JS100 - Can anyone help me to find the correct csanz27 Ibanez JEM, UV, JS & Other Signature Models 2 03-28-2002 10:28 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome