ok, ibanez switch H-H, pos1 = neck(hum mode) pos2 =neck(Inner Coil only) - Jemsite
Pickups & wiring Discussion about pickup types, replacements, recomendations, switching, wiring diagrams and sustainer systems for ANY guitar, JEMs included.

LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 06-25-2005, 04:03 PM Thread Starter
Join Date: Jun 2005
Posts: 18
ok, ibanez switch H-H, pos1 = neck(hum mode) pos2 =neck(Inner Coil only)

hmm, newbe here,...

i just wondering and need pure singe coil sound on my rg 1527... (stock, nothing change yet)

i would like to do switching in this way,..
position 1 = Neck (Hum-series)
pos 2 = Neck (Single coil mode)
pos 3 = Both hum
pos 4 = Brigde (Single Coil mode)
pos 5 = Brigde (Hum-Series)

is it possible without adding coil tapper or adding other parts???...

just using stock pups and switch, how the wiring diagram will go???

7-request is offline  
Sponsored Links
post #2 of 3 (permalink) Old 07-05-2005, 01:15 AM
Join Date: Mar 2003
Posts: 102
Re: ok, ibanez switch H-H, pos1 = neck(hum mode) pos2 =neck(Inner Coil only)

The stock switch is custom-designed and will only give you one combination of sounds. I ran into the same problem when I pulled the mid-position single coil from a 570 and wanted switching similar to my 7620. I'm sure you could get that combination using a 4-pole 'superswitch' but I couldn't begin to tell you how to do it...maybe someone who knows a bit more can shed some light.
rory is offline  
post #3 of 3 (permalink) Old 07-05-2005, 11:18 AM
Join Date: Mar 2005
Posts: 1,469
Re: ok, ibanez switch H-H, pos1 = neck(hum mode) pos2 =neck(Inner Coil only)

That's a new one to me. I'd ask the people over at Dimarzio how to do it. They're really quick with things like this and they'll even send you the diagram of how to do it as well as info on any other parts that you might need to accomplish it. But know this: no humbucker will sound like a true single coil in split mode, and the crappier the humbucker the crappier the impersonation.
lyconxero is offline  

coil mode , coil tap , wiring diagram

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Ibanez RX40 neck single coil. white $20 gee Classified Ads: Guitars and Gear 0 05-27-2013 10:41 AM
help!!! single coil for neck cannabis2894 Pickups & wiring 6 01-05-2012 07:17 PM
Ibanez Reb Beach pickguard, Gibson ES-355 Switch Plate & 1966 Fender Neck Plate mayzan Classified Ads: Guitars and Gear 1 03-25-2011 08:57 AM
Switch neck and bridge on ibanez rg-370 IbanezRG-370 All Other Guitars (including Prestige) 9 08-03-2008 01:33 AM
s1 switch & ibanez s coil tap Screaming Wind Tech: Setup, Repairs and Mods 1 03-08-2004 10:14 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome