wireing help! - Jemsite
Pickups & wiring Discussion about pickup types, replacements, recomendations, switching, wiring diagrams and sustainer systems for ANY guitar, JEMs included.

LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 06-19-2005, 10:08 PM Thread Starter
Join Date: Jun 2005
Posts: 17
wireing help!

I looked and I don't think this question has been posted yet. I have taken off my pick guard on my Jem7v 2003 and I did not catch the pic guard in time and it fell off the body and the two wire's broke off now I have to re solder There is a black and a white wire coming off the volume pot that should connect to the five way toggle. Where should they be connected to. I checked the wireing diagram and made the attempt but it came out wrong the treble was the same but everything else was wrong including the bass pickup being off HELP where should the black and white wire's go?
jemman7blue is offline  
Sponsored Links
post #2 of 5 (permalink) Old 06-20-2005, 11:29 AM
Join Date: Oct 2002
Location: Pompton Lakes, NJ
Posts: 291
Re: wireing help!

The only wires that would break from the pickguard separating from the body would be the ones that go to the output jack... As far as i know. But i dont know everything.
1wi11 is offline  
post #3 of 5 (permalink) Old 06-20-2005, 01:56 PM
bluealien's Avatar
Join Date: Feb 2005
Location: Las Vegas
Posts: 959
Re: wireing help!

Did you go to Ibanez's website they have full wiring diagrams. It should be the same as 03


bluealien is offline  
post #4 of 5 (permalink) Old 06-20-2005, 04:13 PM Thread Starter
Join Date: Jun 2005
Posts: 17
Re: wireing help!

Thanks for the links I will try to figure them out. It is the same diagram as the wireing one in the forum but the one on the Ibanez website is much clearer. The volume and tone pots were unscrewed from the pick guard when it fell off. So the two wires coming from the volume pot were the ones to break. I am thinking the black one goes to the ground and the white one goes to the 5 way. Can anyone verify if this is correct? Thanks for your help!
jemman7blue is offline  
post #5 of 5 (permalink) Old 06-20-2005, 05:59 PM
bluealien's Avatar
Join Date: Feb 2005
Location: Las Vegas
Posts: 959
Re: wireing help!

Here is one from Dimarzio too. I used Both Ibanez & Dimarzio's when I rewired my 7vwh.

bluealien is offline  

wiring diagram

Quick Reply

Register Now

In order to be able to post messages on the Jemsite forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address

IMPORTANT: You will be required to activate your account so please ensure that your email address is correct.

If you do not receive your activation check your spam folder before using the CONTACT US form (at the bottom right of each page).

Email Address:


Similar Searches

People searched for this, also searched for these:

What wireing to use for Guitar Copper

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ibanez wireing diagrams Bun-Bun Pickups & wiring 9 02-24-2010 10:38 AM
wireing a tone zone to an rg 7420 aviad27 All Other Guitars (including Prestige) 0 03-27-2004 12:54 PM
I need wireing help - new pickups in my rg7621 jem7pbk Tech: Setup, Repairs and Mods 3 06-13-2001 10:36 PM
Wireing a jack socket - crossed wires? L8X Tech: Setup, Repairs and Mods 2 01-22-2001 01:32 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome