Wiring Question: Is This Possible
I'm going to buy DiMarzios for an H-S-H strat I'm building, a PAF Pro for the neck, an Area '67 for the middle, and a Norton for the bridge.
My question is, is it possible to, using a super switch and a push/pull 500k pot in the tone slot along with a 500k volume pot, do this wiring:
Position 1- Bridge, series
Position 2- Bridge/Middle
Position 3- Middle
Position 4- Neck/Middle
Position 5- Neck
Tone put up:
Position 1- Bridge, Parallel
Position 2- Bridge/Neck (inside coils), series
Position 3- Bridge/Neck (inside coils), parallel/out of phase
Position 4- Neck/Middle (outside coil of the neck), series
Position 5- Neck, Parallel
With the tone put up, positions 2, 3, and 4 can vary, I really don't care, whatever's easiest will work with me.
I need a detailed wiring diagram, as this will be my first time doing sodder work (or I'll need a diagram to give to a tech if I end up not wiring it).