Jemsite

Jemsite (https://www.jemsite.com/forums/)
-   Tech: Setup, Repairs and Mods (https://www.jemsite.com/forums/21-tech-setup-repairs-mods/)
-   -   zr bridge help (https://www.jemsite.com/forums/f21/zr-bridge-help-157314.html)

65mustang 12-02-2017 06:27 PM

zr bridge help
 
I'm new to both ibanez and double locking trems. I need to replace the bridge studs but i am clueless as to how to properly remove the zr bridge and existing studs. I could'nt find anything here about it. Could anyone please help me out or at least direct me to a detailed instruction. Id really appreciate it!:smile_big:

Rich 12-02-2017 10:39 PM

Re: zr bridge help
 
Detune the E, B, and G a bit and lock the nut. Once you pull the springs off the bridge should come forward enough to have slack strings. Then just pull the nuts off the tops of the studs and the bridge should pull straight up and off.

65mustang 12-02-2017 11:09 PM

Re: zr bridge help
 
Thanks Rich! I figured id change strings while im at it though. How would you recommend i incorporate this fix while changing strings? Also, are there any nono's i should be aware of before proceeding?

Rich 12-02-2017 11:24 PM

Re: zr bridge help
 
All strings off will probably be even easier.

65mustang 12-03-2017 12:56 AM

Re: zr bridge help
 
cool, one last question. when removing the springs is it safer to unscrew them at the block or pull the loops off from the sides of the little bar thingie. im having trouble pulling them off the sides.

Rich 12-03-2017 01:11 AM

Re: zr bridge help
 
Yah, pull the screws.


All times are GMT -4. The time now is 06:20 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
(c) jemsite.com

 
For the best viewing experience please update your browser to Google Chrome