Ibanez JEM Forum banner
3 way switch
1-5 of 5 Results
  1. Pickups & wiring
    I have the solderless 81/85 and 3 way switch the same as this.. 2 and 3, 4 and 5, 6 and 7 are all joined, 1 and 8 independant. I have the same pickups and switch on my other guitar and the neck goes to 2/3, output 4/5, bridge 6/7. 1 and 8 are empty. But they arent the solderless versions...
  2. Pickups & wiring
    hey trying to wire in my 2x new yjm furys. im using a 3 way with 8 pins in stright line, cant really find much diagrams that use a 3 way 8 pin in stright line. trying to wiring in for norm bridge both for mid and neck. its on a pick gaurd and im just tappin testing on pick ups to see if working...
  3. Tech: Setup, Repairs and Mods
    I'm rewiring my Fernandes Ravelle with a set of Gibby humbuckers, I'm told they are a 490 and a 498. All went well as I used the trusty Seymour Duncan diagram like usual, but I see that my 3 way LP style toggle has 5 wires.. one for each pickup, a ground, one that goes to the jack,, and a bare...
  4. Pickups & wiring
    So I have two humbuckers, 3 way tele switch if I'm right. I can't get right the wirings. Dimarzio sent me this, but the guitar didn' have any soudn at all with this wiring. It's still not good this way either. If I turn to bridge position the inner coil of the bridge pickup, and the outer coil...
  5. Classified Ads: Guitars and Gear
    Anyone have one laying around? New or used is fine, just that it works fine, no issues. I found them (part DiMarzio EP1111) on the bay and at other stores for $30. I can't quite grasp spending that much on a itty bitty 3 way switch. thanks..
1-5 of 5 Results
Top