Ibanez JEM Forum banner
arm holder
1-20 of 46 Results
  1. Ibanez JEM, UV, JS & Other Signature Models
    Someone FINALLY did it, an updated arm holder for Edge & Lo-Pro Edge (Edge Pro too!) The company behind Luminlay just recently released a new product, called the "MAGIK-ARM" This is something I've been waiting for, literally for years. RED BISHOP High quality original guitar and bass parts...
  2. Tech: Setup, Repairs and Mods
    Hi, Will Ibanez replacement parts work on my Floyd Rose Pro. I have an old Kramer Proaxe which has the original Floyd Rose Pro tremolo. I beleive the Lo Pro Edge is based on this trem. The tremolo arm socket (the receptical that the trem arm goes into) needs to be replaced. Can I use the Lo Pro...
  3. Tech: Setup, Repairs and Mods
    I keep having a problem with a scratching noise that comes from the tremolo, whenever i swivel the arm around!! I know the noise is caused by the arm scrapping against the spring inside the arm holder cavity!! I'm getting this noise from my brand new rg3120 that i got a few days ago!!!! :D :D...
  4. Ibanez JEM, UV, JS & Other Signature Models
    Wow! This thing is more vivid than photography allows. It's my favorite shade of blue. Does anyone happen to know if this is the old Lazer Blue with larger, random sparkle-flakes added to it? I don't recall ever seeing the LB finish while it was current. I've only seen a used RG770DXLB that...
  5. Tech: Setup, Repairs and Mods
    What the heck is this? I move my trem arm and it makes a squeky kind of a popping sound. Sug?
  6. Ibanez JEM, UV, JS & Other Signature Models
    the trem arm on my Jem is a little to loose. Now it's not loose in the fact of it swaying around too much, but I mean like, when I wanna do small dips and whammy vibratos, it's very "wiggly", if you will. I applied clear coat under the washers. That seemed to only affect the tightness of the...
  7. Tech: Setup, Repairs and Mods
    My question is do you have to have trem posts the with the set screws for an Edge or Lo Pro? I recently picked up a 440 Power and noticed that the trem posts have no set screws, and this isn't the first time that it's happened. I have an early Radius that had the same situation. Anyone else ever...
  8. Tech: Setup, Repairs and Mods
    okay, seems like an easy fix. every once in a while when i use the trem bar, it has this annoying slack to it that feels kind of like ..........um.......sort of like a joystick when it's worn out a little bit and it has that neutral slack that doesn't affect anything. when i rotate the trem...
  9. Tech: Setup, Repairs and Mods
    hello everyone,  I'm having some very noticable buzzing problems from the 12th fret to the 24th on my Jem7VWH. The strange thing is it never used to be like this. I've had the guitar for about 8 months. I've tried raising the action by raising the bridge but when I get it so there's no buzz the...
  10. Tech: Setup, Repairs and Mods
    The Arm Holder Screw and Arm Holder Spring has come off my trem. I took the back plate off the guitar and went to put the small end of the spring back into the Arm Holder then insert the screw. But I must be clueless because it seems the hole on the bottom of the Arm Holder is too small to push...
  11. Comments to Ibanez
    OK, so I am not lefthanded, but these topics seem to come up over and over in posts and discussions on the board, and personally I do think that lefties get a very raw deal, so... Why are there no left-handed signature models? After all, they wouldn't be that hard to produce, the only changes...
  12. Tech: Setup, Repairs and Mods
    I had a somewhat unique problem while changing out the trem plate on my UV777PBK and I thought it may be helpful to share. This may be old news to some…. I got a bare trem plate to replace the original, which seemed to have soft knife edges. Now looking back it may be defective trem posts that...
  13. Tech: Setup, Repairs and Mods
    Are they essentially the same thing? Good Cheese, -VIG-
  14. Gear, Equipment, Recording & Off Topic
    I'm putting together a parts list for my dream guitar and want to know two things. Which is better the Genuine original Floyd Rose Pro or The licenced by Floyd Rose Edge Lo-Pro. Will the Original Floyd Rose fit on the Jem body without any routing or modifications ?
  15. Tech: Setup, Repairs and Mods
    The whammy bar in my Rg2027 broke and a part of the bar got stuck inside the tremolo arm holder ( the part you stick the whammy bar in which is connected to the base plate ). I obviously need to get the part out, but don't really know how to do it. Please help me with this!!!
  16. Players, Bands, Sounds, Tours, Lessons & Theory!
    Hey everyone is it harmful to lift the guitar from the bar like vai does,I a have a rg3120 with Lo-pro.
  17. Tech: Setup, Repairs and Mods
    about my Floyd again... (sorry if I got teh terminology all wrong) - should the saddles in the trem be aligned with each other? - why are there two spots for the "intonation lock screw" and which should I use? why are they called that? - a bit OT, but can I tighten the trem arm with the arm...
  18. Ibanez JEM, UV, JS & Other Signature Models
    I hav suffering with slightly loos trem, the problem can be seen here: http://www.jemsite.com/tech/t_3other.htm#tremarmrot fortunatly the jem site have in this section shown how to fix this problem. However, i cant see how you are supposed to get that wrench in to that tiny gap. On my jem...
  19. Archived Topics and Common Questions
    Since the Edge/Lo Pro Edge won't fit my RG... So, which Floyd Rose tremolo should I choose? I was searching the WD homepage just now and found these: Gotoh licensed Floyd Rose - $295...
  20. Tech: Setup, Repairs and Mods
    Time to ask for some advice... I have just got a package containing a lovely lopro7:biggrin: ,with the locking nut (yay!):thumbsup:, but have found one problem: The nut pads don't fit on the nut:(. Now I don't know wether this is because of damage during shipping, or wether it's down to the...
1-20 of 46 Results
Top