Ibanez JEM Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Tech: Setup, Repairs and Mods
    Hey guys. Love this guitar and the sound I get from it, but I've had a problem recently. When using moving the position of the D-Tuna, the other 5 strings go out of tune. Obviously this shouldn't happen, so I'm guessing that the bridge has somehow started floating? It does look like it is flat...
  2. Tech: Setup, Repairs and Mods
    Hello, I noticed that now that summer came, I needed to slightly screw the screws of the trem claw, in order to achieve the same parallel position of the trem plate as before. I had many incidents like this, back from Oct->Dec when I finally stabilized the guitar. I hadn't touched any tool...
  3. Tech: Setup, Repairs and Mods
    Hi to all, I need some help or advice with my Edge Pro setup. I have a IBZ RG2550 with Edge Pro. I calibrated the guitar to D (D-G-C-F-A-D) with regular 0.10 strings. The Edge tail was raised way too high so I tightened the trem claw screws. * (I will come back to this later) Also I lowered a...
  4. All Other Guitars (including Prestige)
    Well...the body didn't sell...and I knew it was only a matter of time before I stumbled upon a cool neck...so...here I go again! The Kramer "Claw" Neck that I just picked up. :toast - Head Guitars Mahogany Single Humbucker Tele Body (will Oil Finish) & "Jackson" Neckplate - Original...
  5. Tech: Setup, Repairs and Mods
    I got an rg with an original edge trem, and it was set up for e standard with very very light strings. im changing brand, going to heavier guage strings and lowering the tuning a full step. ive changed the three springs to be /|\ - but even when i screw the claw screws all the way in, as far...
1-5 of 5 Results
Top