Ibanez JEM Forum banner

edge pro iii

  1. Ibanez JEM, UV, JS & Other Signature Models
    The low pro of JEM7vsbl got rusting..... Can I replace it for a Edge pro III? I just worry about the fitting... THX My guitar is same as the pic below. And the other shown the Edge pro III that I want to be replaced.
  2. All Other Guitars (including Prestige)
    Does anyone know what Trems will work in an RG1570? The body marking in the neck pocket reads RG1570-05 if that helps? Thanks...
  3. All Other Guitars (including Prestige)
    SyncroniZR ZR II Edge-Zero (!!!) Look like they're all screw-in arms, and I guess the Edge Pro is being completely dropped. Obviously we'll have to play them for final judgement, but any preliminary impressions? I'd like to know the exact details on the SyncroniZR and Edge Zero, it's...
  4. All Other Guitars (including Prestige)
    Someone asked me that he couldn't fit the tremolo arm to bridge. He sent me the pics and i realised i havent got any idea about this arm. I added the pics; Guitar is Rg 370DXL (as he said) I hope you guys have an idea about it Thanks ;)
  5. All Other Guitars (including Prestige)
    I am pretty hip with Fenders and for some strange reason Fender players find great joy in finding the production dates on all of their gear. Old Fender gear (including 70's and 80's made stuff closes on **** for bizzare sums. I was looking at the RG550 re-issue and thought I would be cool to...
  6. Ibanez JEM, UV, JS & Other Signature Models
    I noticed that in the "jem spec sheet" section the following thing was mentioned about jem555 model: "Ibanez' designated "JEM Jr". Prior to January, 1997 the 555s had "JEM Jr." inscripted on the headstock" But if you look new Ibanez jem555 models for example on official site of Ibanez...
  7. Tech: Setup, Repairs and Mods
    Advice would be much appreciated here: I'm aware that an Edge Pro II and Edge Pro are interchangable after hearing success stories from people upgrading their bridge on the forum - but I don't suppose anybody knows whether I would be able to replace an Edge Pro II with an Edge Pro III? Thanks
  8. All Other Guitars (including Prestige)
    http://ibanez.com/forum/forum_posts.asp?TID=4151 GAS away!!
  9. Tech: Setup, Repairs and Mods
    I'm building a RG 320 FM (Flame Maple) that has a KILLER Top. I'm gonna put a prestige neck on it, and some dimarzio's. My question is what is the BEST tremelo I can put on this body without doing any kind of routung. So far I'm assuming it will be the edge III. Anybody had any experience with...
  10. All Other Guitars (including Prestige)
    Has anyone replaced the edge pro 3 on a rg350dx?
  11. All Other Guitars (including Prestige)
    Ok I have an Ibanez RG320FM with an Edge Pro III system and I'm having a problem screwing a screw into the nut. The pad for the E and A string can't be held tight because the threading in the hole is stuffed so the screw won't screw into the hole properly. Ok, if you've managed to keep...
  12. All Other Guitars (including Prestige)
    I am not trying to do this but i know someone that asked me and i have no clue . I thought that the edge pro 3 was actually based off of a lo-pro but i dont know how they measure up . any help would be great thanks
  13. All Other Guitars (including Prestige)
    As I asked...what is the bridge on the RG1550? I was told it was a Edge Pro, but I have never heard of theis. Could they have meant an edge lo pro?? Thanks all..
  14. Tech: Setup, Repairs and Mods
    Hey I've been reading that the EDGE PRO III can put tension on the bar.... my problem is that i like it really loose like Vai but it keeps coming out to easily (It dosen't have washers) so whenever the gutiar is face on a angle or upside-down the bar jsut slips out, its REALLY annoying. So can...
  15. All Other Guitars (including Prestige)
    Just recently i got an RG 320 FM (fireburst finish) and i already know im going to modify this baby like krazy. Ok now im sure im gonna get an EMG 81 Active bridge pickup installed, add some inlays in the fretboard, and finally get the Edge 3 Trem replaced by an original Floyd Rose trem. Here's...
  16. Ibanez JEM, UV, JS & Other Signature Models
    I recently saw the new Edge III bridge in the 2005 Ibanez catalog and was wondering if this would fit in the new (current) JS production models? I have always been a fan of the original Edge bridge and this new Edge III is supposed to be similar in construction and feel to the original Edge...
  17. All Other Guitars (including Prestige)
    Got me a RG320FM amber with a cool fat looking flame pattern but after years of playing 'real' Edge and lo pro Edge model trems on my Jems and some of my other Ibanez's I am not just 100% knocked out with the Edge III. What Edge trems will retrofit the Edge III? Will the 'original' Edge? The Lo...
  18. All Other Guitars (including Prestige)
    Hello all! This is my first time posting a thread here (and I hope I'm posting it in the right place) and I wanted to talk about my first Ibanez guitar.....the RG370DX. I got it last thursday and I'd have to say that I'm quite in love with it. When I got it, it had a few minor problems: it...
  19. All Other Guitars (including Prestige)
    hey i saw this on the ibanez site...it's on the lower end guitars. http://www.ibanez.com/guitars/guitar.asp?model=RG320FM did they just rename the Edge Pro II or is this something new?
  20. Jemsite Featured News
    Still a work in progress, I got a late start on it and there was allot to digest and sort out. I'll get back to working on it later but everything through the RG/RGA Prestige is up and running so it's a start ;) http://www.ibanezrules.com/namm/2005/index.htm
Top