Ibanez JEM Forum banner
evo2
1-20 of 36 Results
  1. Pickups & wiring
    I have a RG570 that I am upgrading and wanting to make into a JEM style guitar (sort of). In terms of the pickups I want to somewhat mirror Steve Vai's EVO, except I want some additional options. I also want to use the Evo2, over the original Evo. I want to have.. Neck - Evo2 reversed (non F...
  2. Pickups & wiring
    Ibanez S series with Evo2 set. Is wiring correct? Hi, I have an Ibanez S470DX with an Evo 2 set in it. When the pickups were installed they were a) coil tapped, b) put in back to front (long story from about 8 years ago with a dodgy guitar tech) and whilst I was told they were finally correct...
  3. Classified Ads: Guitars and Gear
    Dimarzio Evo2 - $50 Ibanez stock pickups from 2012 SA 160: Humbucker (Ceramic) - $25 1 neck (Alnico) - $20 1 middle (Alnico) - $20 Humbucker from Ibanez 2005 SA 260 (AH4) - $30
  4. Classified Ads: Guitars and Gear
    $40 shipped in US. Good condition plenty of lead (can send pics if needed).
  5. Pickups & wiring
    The guitar is a mahogany Ibanez RG(thinner body than my basswood RG) with a maple top and maple neck. At the moment the guitar is packed with V8/S1V7. This axe is on a bright side, with a lot of midrange presence and it lacks in lowrange/bass section(Bridge pickup). I need a very versatile H-S-H...
  6. Classified Ads: Guitars and Gear
    Good condition. Plenty of lead. $60 shipped. Email: [email protected] or pm. OBO, what are these selling for?
  7. Pickups & wiring
    i am going to get a bridge pup in 3 days and i still cant decide I realy like the sound of the evolution (never had the chance to play with an evo but i have heard a lot of samples and videos) and from all the pups i have heared its probably my fave the problem is i play guitar 3 years and i...
  8. Gear, Equipment, Recording & Off Topic
    Just bought an Ibanez S570DXQM to start fiddling around with a tremolo again and I want to change out the stock INF pickups. I'm stuck between the new Dimarzio Gravity Storms and the Evo 2's. Anyone have any opinions? Suggestions?
  9. Classified Ads: Ibanez JEM/UV Guitars
    I have a 2002 7VSBL in excellent ++ (very close to mint) condition. I have modified it with a black pickguard, LiquiFire neck and Evo2 bridge humbuckers in a black/blue color combo with an Evo single coil in blue. I added blue (Jem BFP) knobs and switch tip (real ones from Rich, not Ebay...
  10. Classified Ads: Guitars and Gear
    Black. $55 shipped. Andrew [email protected]
  11. Pickups & wiring
    1. What type of music do you like? The safety fire, Dream theater, scar symmetry, opeth, 2. What type of equipment are you going to be playing through? Hughes & Kettner Triamp MKII, ISP decimator. Soon to sell this and aquire an Axe Fx II for recording. 3. What are the specifics of your...
  12. Pickups & wiring
    Last year I struggled finding pups and a config (tone circuit) that could tame the brightness of my Kawai Aquarius. I bought a FRED and was way to much trebly to me and had a chance to deal it with a norton. I had a double whammy in neck position which I took of my RG 550 LTD and replaced by a...
  13. 7vsbl After

    Changed to black pickguard, blue controls, Liquifire neck, EVO middle, EVO2 Bridge - inspired by 77BFP & GMC color schemes...
  14. Pickups & wiring
    Hey guys... looking for a little input before I pull the trigger on a Jem overhaul. Spec details first: Guitar: Jem 7v (Alder body, Edge Lo-Pro trem, rosewood fingerboard) Current Pups: Original EVOs (H-S-H) Amp: Original 5150 full stack Style: 70's-90's hard/prog rock (heros: Vai, Petrucci...
  15. Pickups & wiring
    Oi guys, 1. I just bought a new jem 505, 5pc Maple/Walnut Prestige Jem neck, baswood body and maple fingerboard. It is quite an amazing guitar, i expected way less of the V´s, they are actually decent pickups but definetly not enough, it is a sin not to change the pickups and customize the...
  16. Pickups & wiring
    I got a FRED, which I tested yesterday in my RG550 in brigde position, coupled with the Paf Joe (originally I had a EVO2 in bridge position). I would say I prefer the EVO2, the FRED has to me a different sound definition and I prefer the "agressivity" and the presence of the EVO2. So I went...
  17. Pickups & wiring
    I am currently planning to buy Dimarzio CrunchLab in the bridge for starters, and hopefully get a LiquiFire on the bridge. I told the Tech at Dimarzio's : "As of now, the natural harmonics under gain settings do not sound prominent in a mix. The neck PUP sounds great really...
  18. Pickups & wiring
    Hi folks, This Is for RG550 basswood body owners. So many threads about this question... Many tests, many players, many results and in the end ? Here's your opportunity to write your conclusion so please help me to make my choice too: " What was your very best choice at that time, I mean...
  19. Classified Ads: Guitars and Gear
    I have the following available: - Evo neck, white, black poles, f-spaced $55 - Evo2 bridge, white, black poles, f-spaced $55 - Virtual Vintage '54 Pro hum-canceling single, white $50 Take all 3 for $150 All are about 3 months old, perfect condition and have super long leads. They just weren't...
  20. Pickups & wiring
    RG550 reissue (maple board), originally came to me with PAF-Pro/FS-1/PAF-Pro and the neck sounded good but the mid & bridge positions sounded thin and bland. Installed Evo/VV-54/Evo2 and it's definitely not what I expected. The neck Evo is real dark, not muddy, but real bass-heavy. The Evo2...
1-20 of 36 Results
Top