Ibanez JEM Forum banner
fingerboard
1-9 of 9 Results
  1. All Other Guitars (including Prestige)
    I have a Yamaha FS100C acoustic guitar. In website it says Fingerboard Radius: R400mm (15 3/4") what does it mean I can't understand as I am a beginner. I want to get a capo for it, so i want to know if it has a flat fretboard/fingerboard or radiused fretboard/fingerboard. I bought Daddario...
  2. Tech: Setup, Repairs and Mods
    I've been modifying a RG570CT (one way truss rod) and my next step is to install the frets. I need to minimize the upbow caused by the fret tangs (hopefully not) although I've already cutted the slots a little bit wider than the fret tangs that I'll be using. Is there any trick, method, technic...
  3. Tech: Setup, Repairs and Mods
    Hey guys, I was just wondering what kind of fingerboard and fret repair I'll need to fix this neck. The fingerboard has substantial depressions and some of the frets have wear from the strings. Can these frets be filed or do I need a re-fret. I know that at the very least they will likely...
  4. Tech: Setup, Repairs and Mods
    I've found som really interesteing fingerboards and inlays from ai guitars on ebay. Does anyone have any experience of them? Does the fingerboard fit directly on the jem neck or does it need a lot of adjustment? Anyone? :)...
  5. Tech: Setup, Repairs and Mods
    hi there, i read a thread here about Clearcoating fretboards; working on a fretboard with a lot of MofP inlaying i wanna clear coat it. should i block the fret slots ? does anyone know how Fender does this on their telecaster so that the fret slots are not filled with clear coat ? or do they...
  6. Tech: Setup, Repairs and Mods
    Ok so I have fingerboard pre routed for disappearing pyriamid inlays.. I need to do the following: Epoxy inlays to fingerboard Trim "Overhang" on fingerboard Bound fingerboard to neck Radius Re-fret - (will be sent of to a professional) Is this the proper sequence/steps. My concern is with...
  7. All Other Guitars (including Prestige)
    I recently got an older model (1999) or so 7 string rg at a pawn shop here in town. I got a good price on it because the fingerboard has started to separate from the neck at the first fret. Now, I know this is a relatively easy fix for my luthier but I have plans for that paint on this guitar...
  8. Ibanez JEM, UV, JS & Other Signature Models
    Where can I buy a pre-fretted pre-inlayed, ready-to-go maple finger board with pyramid inlays? I'm on Canada, ON. Thanks.
  9. Ibanez JEM, UV, JS & Other Signature Models
    I recently bought a perloid and abalone inlaid rosewood scalloped fingerboard from ****.I believe it was made by ET guitars.It has 6 small holes 2 on the nut area..2 on the 8th fret and 2 just past the 24th fret position.These are on the outer edges...are these for screwing it down to something...
1-9 of 9 Results
Top