Ibanez JEM Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Gear, Equipment, Recording & Off Topic
    I picked up an old tube head the other day. It's a "The Cobra Mark 2" head made by a company called "Lifco" out or Montreal Canada. The amp has two 6v6's and two 12ax7's. It needs output tubes, the bass and treble pots need cleaning and probably replacing but as it is it sounds prety cool. I...
  2. Tech: Setup, Repairs and Mods
    Hello guys, I am very optimistic that I will be able to build my own 2x12 speaker cabinet in the near future. I plan to use two Jensen MOD 12-110 or 12-70 speakers for this project and I was wondering if I could put an impedance switch on it that would be able to switch the ohms rating from 4...
  3. Gear, Equipment, Recording & Off Topic
    Hi all, just been thinking about impedances on pedals and tone. Apparently, guitars work best with a 1Mega ohm impedance, which is the input impedance of boss pedals. However, the output impedance of Boss pedals are only around 10k ohms. If I'm daisy chaining pedals, won't the impedance...
  4. Gear, Equipment, Recording & Off Topic
    Hi all. I have yet another question: Is it possible to run a 16 ohm cab and an 8 ohm cab at the same time (with a Valveking 100 head)? If so, what impedance should I run it at? (Running cabs in parallel gives an impedance of ~5.3 Ohms, so should I use a 4 Ohm setting?) Thanks Regards Jon
1-4 of 4 Results