Ibanez JEM Forum banner

out of phase

  1. Pickups & wiring
    Morning Chaps! I bought a second hand Jem7v over t'internet, and although I paid a good price, it definitely has some issues, lose pots, missing backplate (found in the case complete with gold screws!), very badly adjusted neck and bridge. Someone (The Butcher) had really been hacking at this...
  2. All Other Guitars (including Prestige)
    I finished converting my Gibson les paul faded honeyburst, I have been giving it the Jimmy Page treatment. I wired the pickups out of phase when both bridge and neck are activated, fitted a push/ pull switch to split the bridge pickup. I had to fit a new pickup in the bridge position, a Seymour...
  3. Pickups & wiring
    hi I have rg570ct (ash body, fm top) I bought a set of dimarzio/ibz pickups, 2 cts pots, orange drops cond. and oak 5 way switch. I wired everything together as it is shown on dimarzio hsh diagram 2,3,4 positions are ok, but in 1. and 5. position I get very thin weird sound (I think it is out...
  4. Tech: Setup, Repairs and Mods
    Hi this is my first post to the site, hope to find it usefull. I have an old Ibanez RG370, not sure of the exact year but think i got it around 1995, its a great guitar for practising and playing around with sounds and tones. I'm trying to experiment with the set-up to see what kind of tone...
  5. Pickups & wiring
    I'm new around here and the guitar world altogether, I have yet to finish my first year of playing, but I like electronics and looking for some replacement pickups for my Ibanez GIO (GRG-270) I came across all sort of wiring information, so until my order arrives (Bill&Becky L500XL and L90)...
  6. Pickups & wiring
    so, i rewired a pair of dimarzio evolution 7s with a 5 way super switch. for the first two positions, i wanted full humbucker in 1, and coil split to single coil in position 2, without the other pickup involved. now, first postition works fine, but 2nd sounds really thin, like its out of phase...
Top