Ibanez JEM Forum banner
pickup swap
1-5 of 5 Results
  1. Pickups & wiring
    Looking for possible reasons for the buzz after a pickup swap, can you help? So my buddy is unhappy with the sound that his bridge pickup puts out, and I offer to do the swap-out mod. He shows up with a 2003 Korean Schecter contour-top with a Duncan Designed H-H config, with 1 Pull/Push pot, 1...
  2. All Other Guitars (including Prestige)
    Need help with this HSH diagram NOTE: I believe these wire codes are correct for modern Bill Lawrence humbuckers (Bill & Becky, not Bill Lawrence USA, which are different). Bill Lawrence Wiring & Tech Info Wiring & Tech Info White = SS positive lead for South Coil (+ when used as regular...
  3. Pickups & wiring
    Just curious what would happen if I take one of my Dimarzio bridge pickups and just swap it with the stock bridge pickup in my 2001 RG 570 without any other modifications?
  4. Pickups & wiring
    Last year, due to a slight auction site error, I bought two RGT42s in the same week : http://www.jemsite.com/forums/f18/ngd-a-brace-of-rgt42s-94627.html The grey one was just sitting in a rack and it wasn't getting used, so it volunteered itself for my next project. First off, I don't hate...
  5. Pickups & wiring
    Hey guys, I am thinking about replacing the stock neck humbucker in my rg770. The pickup sounds kinda muddy and jumbled together when I play chords, is this normal? It just sounds dirty, no clarity...is it because it's old, or poorer quality than newer stuff?? I don't know...anywho, a couple of...
1-5 of 5 Results
Top