any non conventional (there's a lot) wiring and pickup uses need special switches and it's very hard to just find the right one and i need to "improvise".
Someone who are familiar which switches can give me a help???
I want to do this wiring...
I am wiring up an old Jackson Dinky Professional with SD Invader in bridge, DiM HS-2 in middle and Screamin' Demon in neck. I have a DiM EP 1112 5 position multi-pole switch and some push-pull pots. I am thinking of doing the standard JEM wiring from the diagram on the Ibanez website, with two...
I finally got my hands on a UV7BK! It was rather dirty and poorly setup when I received it so it is in the process of being cleaned and setup...
I have a few questions:
1. It has a blank neck plate with only the serial # 2562XX what year is it? I thought it would be a 95-96 but someone over...
I need a superswitch wiring diagram (please) for the following
1 - Bridge alone
2 - One coil bridge, one coil middle (humbucking)
3- middle humbucker alone
4 - One coil middle, one coil neck (humbucking)
5 - Neck alone
If you have any combos you feel are worth trying...
The pull-push volume pot on the FGM400 switches in the neck pickup irrespective of the position of the 5-way pup selector.
I've had my FGM400 for a while now and never thought much about this, but I wondered what the default 'pushed-in' position should do with the neck pup. On mine it has the...
Hey guys. Dug out my RG 470 (Japan model) from 1999 and put in all 3 new evolution pickups. Started with the bridge evo 1, then added the ISCV2 in mid, and finally the evo neck in neck position. These installs where done on three different dates. The evo 1 in bridge installed excellent, no...
So I finally got around to taking pix of my new acquisition since Sept. Serial# F145xxx, presuming it was made in 91, it technically has the same first 4 digits as my UVGR. Got this from a fellow Jemsiter (Ibanut) and he asked me to keep the original parts if I ever modify it. I had planned this...
The HH Ibanez models with a 5 way switch use a special (non-strat or RG 1550, 550 type) switch....right?
I am looking at diagrams for the RG7321 and models with similar switching and the switch has to be different or else the bridge is split and the neck is on and or off at different ..wrong...
To achieve this:
Position 1: Neck SERIES
Position 2: Neck PARALLEL
Position 3: Both Humbuckers
Position 4: Inner coils of both humbuckers (ala Petrucci)
Position 5: Bridge SERIES
with a set of Evos and a STANDARD 5 positions dimarzio switch??!!?!?!?!
This configuration is like the one the 2...
Hi! Well, I'm planning to do something "special" with the wiring in my mahogany S470 and being a complete electronics NW I need your help. Here's the deal:
Pair of Evo's
Original AS1 sinclo pick up :S (planning to change this soon)
5 position selector
Position 1: Neck...
I'm selling some Ibanez RGT3120 parts, all original and in Excellent condition (apart from the body).
All in Silver (apart form the black - original - Trem Arm)
Ibanez RGT3120 Japanese Custom Made Ultra - Thru Neck w/ 2 x Ibanez QM1/2 pickups (£50)
Ibanez Lo Pro Edge Trem + Original...
Just finished building this for myself - kind of a 7-string Jem rather than a UV (with the monkey grip, lions paw, and vine). Mahogany back with thick quilt maple front lacquered in nitro-cellulose, Unfinished maple vine fingerboard on maple neck, Flame maple lacquered veneer on headstock, Blaze...
Well, despite everyone thinking that these are the plainest, I kind of like the understatement, so when i saw one I kind of pulled the trigger, and in a few days it'll arrive! Decent price as well for it, so I am pretty pleased!
Anyway, this joins the 91 UV7BK, and the '90 UV7PWH and completes...
I want to rewire my RGT42FM to have these sounds:
3)neck and bridge full
I know I'll need a multi pole switch to do this.The problem is,I can't find a wiring diagram for it.I've seen one for wiring a single pup parallel but,not with...
hi guys, i've been asked to wire a HSH this way:
the selector is a VLX91 and pickup-wise we have:
(neck): 4-conductors DiMarzio PAF7
(center): 2-conductors Ibanez single-coil (black + white)
(bridge): 4-conductors DiMarzio ToneZone7
now, i don't know wether it's possible or not, just...
Ok, I have a Dimarzio Air Zone and Air Norton on the way for my Ibanez SA320X.
The guitar has 2 humbuckers on a 5 way switch which has 8 contact points on it (I'm not sure of their official term).
The current wiring has them set up as follows:
Pos 1 - Bridge
Pos 2 - Inner singles
Pos 3 -...
Wondered if anyone could help here. My 7621's bridge pickup has some issues - microphonic I think - and I'm going to buy a replacement. However, a real problem with researching into buying pickups is that they all seem to have great reviews! So the choice is rather hard.
My RG have 3 way switching (H-H) and i want to have 5 way switch, is that posible? I saw a wiring Diagram by RGA121 and it has 5 way switch with 2 humbuckers, can i use the same diagram? By the way Im putting Tonezone(B) and Pafpro(N).