Ibanez JEM Forum banner
push-pull
1-11 of 11 Results
  1. Gear, Equipment, Recording & Off Topic
    Hi everyone, I'm about to start a project on my Japanese '93. RG 470. The stock pickups were changed to Evolution neck and bridge with True Velvet single coil. Now I have ordered the V-Treb treble bleed circuit for it, and I want to split the neck pickup using the 500k push-pull pot on volume...
  2. Pickups & wiring
    Hey, I have a Cort m600, witch has a 3 way toggle, 1 vol, 1 push-pull pot. I want to have parallel mode with the push-pull, which I was told it cannot be done. I've read, that with this it can be done: http://www.guitarelectronics.com/product/CPP500/Alpha-500K-Audio-Pot-w-Push-Pull-Switch.html...
  3. Pickups & wiring
    In the process of getting my RT650 back to stock I've reinstalled a push-pull pot, which before I had it was removed. Using a diagram from Jemsite (since the ones from Ibanez weren't working out for me), I got it working- but backwards. The humbuckers are split when the tone pot is pulled...
  4. Pickups & wiring
    Hi, I recently purchased a used, made in Japan Ibanez RG470L, which has a HSH configuration with a 5-way selector switch. Since I only use the neck and bridge pickups, I would like to remove the middle pickup, replace the neck and bridge pickups with a DP151 PAF Pro F-spaced at the neck and a...
  5. Pickups & wiring
    So recently I couldn't close a deal on a used guitar and now considering to add a push-pull pot to my rg3120. Intention is to get more variety from pickups selection but a comment on a product cought my attention. It says not only these can be used for pickup variation but also can become a...
  6. Tech: Setup, Repairs and Mods
    I have one guitar that has three pickups. HSH configuration. My other guitars are HH. The HSH bugs me often when i want to get the Neck and Bridge combination. I've read in the past about using a push-pull switch to add the bridge pup to whatever position the switch is in but never thought it...
  7. Pickups & wiring
    Hi all, First post so hi :) Recently got a green FGM300, which is ace and has just been fret-dressed and set-up up by an excellent tech I use all the time. However, he installed a new DiMarzio push pull as the original was damaged (as was the body) during transit from Canada to Scotland...
  8. Pickups & wiring
    Need help wiring an EMG81tw, EMG SA and a Dimarzio tone zone. Because of the EMG81tw I need to have 2 push-pull pots for coil splitting and I can not find anything on the internet for what I need. I spent 4 1/2 hours tonight trying to figure this out. I got the 2 EMGs working fine but I can't...
  9. Pickups & wiring
    So I am very close to finishing my current RG project. I thought of this for the controls instead of just the plain old RG control layout. Is it possible to use a push-pull from Dimarzio and have the volume in the pulled position and tone in the pushed position? Also, is it possible to use a...
  10. Ibanez JEM, UV, JS & Other Signature Models
    Hi guys, My volume push pull on my js is broken, the question is ; which one should i choose to replace it? If you can help? http://www.banzaieffects.com/Guitar-Pots-c-454-p-2.html Thanks
  11. Pickups & wiring
    Hi all, I found a good deal on an EMG 89 and an EMG 85 ($90) which I plan to put in neck/bridge respectively. The EMG 89 is designed to work with a push/pull tone pot. I am going to install them in my new 540P-II. However, it does NOT have a tone knob, and I don't want one either! Does...
1-11 of 11 Results
Top