Ibanez JEM Forum banner
push/pull
1-6 of 6 Results
  1. Pickups & wiring
    Hi, I am searching for a solution to mod my guitar HH,5-way superswitch, 1Vol, 1Tone (push/pull) in the following way: 1. Tone push/pull pot DOWN: 1.bridge hum series; 2. bridge hum parallel; 3. bridge + neck hum series; 4.neck hum parallel; 5.neck hum series 2. Tone push/pull pot UP...
  2. Pickups & wiring
    I have just installed a set of 1st gen Evolutions (HSH) in my RG470. For the first time ever, I cooked the volume pot. I am going to replace it with a push/pull pot. So, I was wondering if anybody has used the EVOs and could recommend which mod to do. I could use it to 1. make the neck or the...
  3. Pickups & wiring
    Hi there, Im currently Swapping out my charvel So-Cal with a Evo SingleCoil on neck instead of a Tone-Zone. I will try to make a JS2400 ish wiring. Evo SingleCoil to the Neck, Evo2 Bridge to the bridge, Push/Pull Pot to split Bridge. 3 Way Toggle to Swap Between Neck/Neck+Bridge/Bridge No...
  4. Tech: Setup, Repairs and Mods
    Hey, I recently bought a used, year-2010 model JS1000. During shipment the push/pull of the tone pot (which controls the coil split) broke so I immediately brought it to a shop to get fixed and get to get a complete setup. I just got the guitar back yesterday and and it seems to work, but...
  5. Pickups & wiring
    Hi Guys, I have an rg1570 with DM Breed at the neck, DM FS-1 in the mid and SM Dumebucker at the bridge positon and I also changed the stock Tone control for a Push/Pull one. I wasn't able to find a proper wiring diagram for this setup so I tried to make it for my self but I didn't work. Please...
  6. Ibanez JEM, UV, JS & Other Signature Models
    Hi all, I recently acquired a JS1000 made in 2000 in mint condition, all stock (even still had the peel-off protectors on all the plastic parts). It has the coil tap on the tone knob as normal, but the volume knob is also a push pull pot. When engaging it I can hear no difference. What gives...
1-6 of 6 Results
Top