Ibanez JEM Forum banner

screw

  1. Ibanez JEM, UV, JS & Other Signature Models
    I checked Ibanez's site for the screws that hold down the string retainer bar behind the nut but was unable to find that part. I was wondering if anyone here knew where to find those screws? Also I was wondering if anyone knew where to find the locking nut allen wrench screws that you tighten to...
  2. Tech: Setup, Repairs and Mods
    Hey, I've gotten a PGM 301 and I want to replace the ****ty rusted out mounting screws on the VLX91. Can anyone tell me what size/diameter/thread, etc the screws are? Thanks in advance :)
  3. Tech: Setup, Repairs and Mods
    Hi guys. Anyone know what size the screws are that connects the round tuning peg (the part you turn), to the actual tuning peg that's connected to the headstock? I misplaced mine and they are very small. I tried 4g x 12mm ones from the hardware store, but they were too small. I think a 3g one...
  4. Tech: Setup, Repairs and Mods
    Hi everyone, I bought a used RG1550 1 year ago and when I do a pull up, the prevents to go further hiting the body. I thought it was normal but a couple of weeks ago the block was losen so I remove the trem and screw it again and I found out that the screw-holes in the block where in angle...
  5. All Other Guitars (including Prestige)
    So a friend of mine wanted me to sand down the finish of his WizardII neck, and make it slightly thinner. He just bought the Ibanez off Ebay a few weeks ago (Paid $300) It seems the previous owner used some sort of super glue on one of the neck-bolts to secure it? I've tried my best to loosen...
  6. Get verified by [Post New Thread] to participate
    i was adjusting the intonation on my RG and the saddle screw stripped, any ideas in how to get it out?? i have spare saddle screws to replace that one but i need to unscrew that on first, thanks
  7. Tech: Setup, Repairs and Mods
    What does the screw at the bottom of the Edge Zero trem arm holder do? Are the other things that can be adjusted on it? Is there a schematic of the holder somewhere? (Trying to get the arm to rotate freely and get rid of a grinding noise as it's being rotated.)
  8. Tech: Setup, Repairs and Mods
    Just a quick question to confirm something for me. Is the screw spacing for Edge sustain blocks the same as OFR ones? Cheers :)
  9. Pickups & wiring
    What kind of screws should I use to direct mount dimarzio pups to a body. The screws that come with them are for scratchplate mounting. Thanks.
  10. Tech: Setup, Repairs and Mods
    Here is a 'how to' video I made on fixing stripped guitar pickup mounting holes. Hope this helps!
  11. All Other Guitars (including Prestige)
    RG370DX Tremolo Arm Torque Screw Lost ! Hey.. I was at stage yesterday playing with my lovely RG370DX and I was not using the tremolo Arm the whole time. Today I noticed that the tremolo arm is so loose. so normally I got out my Allen Wrench to tighten it up. And I kept turning and turning but...
  12. Classified Ads: Guitars and Gear
    Hey guys, just looking for some spare black screws found in Ibanez guitars for pickguards and cavity plates. Thanks!
  13. Classified Ads: Guitars and Gear
    Hey guys, I'm looking for a saddle screw for a LO TRS 2 floyd rose tremolo (i know terrible :\) If anyone has one kicking around then please let me know :) Urgent!
  14. All Other Guitars (including Prestige)
    The other day I manually installed a dimarzio cliplock and now I'm thinking about swapping it for the strap pins my guitar originally came with. I know the dimarzio screws are longer than most straps screws to ensure stability, but I was wondering if reverting back to the shorter screws would...
  15. Tech: Setup, Repairs and Mods
    My screw to attach the humbucker to the pickguard is apparently stripped. Does anyone know what size this screw is? Or where i can find a perfect replacement? Thanks
  16. Tech: Setup, Repairs and Mods
    i'm trying to find a plain black plastic pickguard for my rg2550z. there's only 1 on the bay at the moment and from inspecting it visually from the pics, it's slightly different to my one and the screw holes appear to be in different places. why? where can i get one to fit my guitar? i PM'ed...
  17. Get verified by [Post New Thread] to participate
    I recently stripped one of the pressure pad screws on the locking nut on my Ibanez RG350 and I was wondering if a Floyd Rose pressure pad screw would work/fit as a replacement????????
  18. Gear, Equipment, Recording & Off Topic
    Okay I have a bit of a problem with the floyd on my ESP. Once I set the guitar's intonation, the saddles moved so far back that the string lock screws are past the cavity, making me only able to pull up a half step and making flutters sound like @#$%. I only need a few mm less but I can't file...
  19. Tech: Setup, Repairs and Mods
    One of the string clamp screws from the locking nut of my S got damaged when I was locking the strings. Will a regular String Clamp Screw fit in its place? Are they made on a Universal size? They are exactly like the ones I have on a Jackson RR, wich I got from Stewmac as a replacement for the...
Top