Ibanez JEM Forum banner
stripped
1-6 of 6 Results
  1. Tech: Setup, Repairs and Mods
    Hello, I just found this : at our local Lidl (a german-austrian market chain) with many cheap but good quality foods/clothing/tools, etc.. Well this thing is tough! I filled a 8mm dia hole, then tapped it and screwed a wood screw, 5mm ext dia, 3.9mm inner thread. By screwing the wood screw by...
  2. Get verified by [Post New Thread] to participate
    i was adjusting the intonation on my RG and the saddle screw stripped, any ideas in how to get it out?? i have spare saddle screws to replace that one but i need to unscrew that on first, thanks
  3. Tech: Setup, Repairs and Mods
    Here is a 'how to' video I made on fixing stripped guitar pickup mounting holes. Hope this helps!
  4. Pickups & wiring
    I just had to see how it was inside.
  5. Tech: Setup, Repairs and Mods
    so where to begin... i was just changing strings with the installation of an air norton on my 520qs, and when i got them back on and played with the springs in the back, i noticed my action was fairly high. i went to adjust the trem-post height a little, and noticed that the sleeve that the post...
  6. All Other Guitars (including Prestige)
    Some of you may recall the story of how my girlfriend's cat peed on my '92 470. Since the guitar was pretty much ruined, I decided to strip it with a heat gun and burn it a little along the way. The idea I'm having now is to use vivid wood dyes (from ReRanch) to stain it in a free form...
1-6 of 6 Results
Top