I have replaced a Lo-Pro Edge with a Floyd Rose on a RG550LTD. I didn't have a big nut to use the trick to remove the stud inert (hardware shops are closed in Bangkok) so I have used the old studs.
The studs are a little bit different (I forgot to take a side-by-side picture) but so far it...
I was cleaning and replacing the bridge on the JEMSP the other day (GOTOH GE1996T) and mispalced the original studs. The Gotoh ones are considerably harder to put on without surgery.
Am hoping to find some aftermarket ones and wondering if anyone knows where I could get them or the...
I bought a 2009 RG 1570 that has the Edge pro tremolo. I know it doesn't have the locking studs.
Since I'm in Europe it's easier for me to buy them here and not from Ibanezrules.
Are these the locking studs that I need...
For my current build project I have an aftermarket jem body and an original edge trem with locking studs but no bushings/inserts. You cant buy Ibanez edge bushings in sweden, only floyd-rose variants. So my question is:
Will edge studs fit into bushing made for floyd-rose trems?
I did an...
Which studs work best with Edge Zero trem?
I have read many threads and Rich's website on the awful studs that come with the Edge Zero. I have also read that the LP Edge studs may not allow the Edge Zero trem to return to zero. So I am confused and looking for input.
Which studs work best with...
Can anyone tell me if this works with original edge?
How does it compare to locking studs?
Is it worth 20.00$
A student came to me with a guitar presenting cracks in the body in studs holes.. the studs ( and the stud interst are out of rout causing bad string action an bad tuning.. theres salvation to this cracked body?
I thought I should share this with you. There is an original Handrest on the auction site right now. There are no threaded studs included, you have to buy them somewhere.There are NO bids. Sadly I don't have a bank account, so I can't buy it myself. ;)
I'm currently building a Frankenstein guitar with a RG320QM body and a neck, pickups - the usual ;-)
I have a tremolo but the trem studs are too small to fit the inserts already fitted. Does anyone know a good seller in the UK where I could get the correct studs?
Here's the problem, the small screws that lock the peg things (forgive me I really don't remember what they're called) have been rounded off, so I can't change the action on my JS1200. I'm not to sure how to tackle this problem, so a bit of advice would help a lot.
so i got this Flower Pattern Body from an auction house, i have a Tremolo (Ibaneze Lo Pro Edge) and everything to install it, the Neck is going to be custom made and pickups are not yet purchased.
So i wanted to know, i have got the Body and the Drillspots for the Anchors of the Tremolo...
I recently purchased an RG1570 Prestige which I got back yesterday after a full set up. I asked for the action to be set really low, get a fret dress etc...
However, after bringing it back home I was pretty disappointed to find out that the action was a lot higher than I expected (a...
HELP ! i've just broken one of my edge pro studs
-in fact , one of the two the big screws that holds the bridge knives , you know ... the screws that allows to fine tune the intonation ... (i think you know what item i mean) ...
this happened in a divebomb session on my beloved RG7620 (with...
Long story short, after years of contouring the heel of my strat and messing with my bridge to stay in tune, i gave up and got a used ibanez rg 220. What changed my mind was borrowing my good friends hideous pink early 90s RG. It has an edge tremolo with locking studs. Plays...
I need a pair of these edge trem posts.
i have - 6 cosmo tuners, made in japan
- 1 locking nut set with pads, cosmo, screws in from the top
- 1 locking nut set with pads, black, screws from the back
references - ****- 123wchen
I'm in Sydney, PM me to work this out.
Been a while since I posted but I'm really hoping the combined wisdom on here can help me with some tech issues I have been having.
I have recently removed the Backstop device from my Hamer Diablo so the trem (Schaller Floyd) is now fully floating and have added a Tremol-no. A...
I'm swapping my Edge 2 for an Edge Pro and I have a couple questions....
-I'm only getting the bridge and arm, nothing else, should I get new posts??
-Also should I replace the springs?
In case your wondering I do lots of Vai type whammy tricks, like fluttering, and I need sensitive tremolo...