Ibanez JEM Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Pickups & wiring
    Im trying to figure out how to wire this cab up without frying my amp. My cab is a 4x12 with a stereo/mono switch and its driving me nuts. There are 4 wires inside 1 set for stereo and one set for mono. Should I be using all 4 wires, 2 wires or mix match? We started out using the + and...
  2. Pickups & wiring
    So, I was at band reh today playing my new Charvel and noticed that my tone was kinda muddy. Or no, it wasn't particularly muddy it just didn't sound right... Like it was too dark or no bright enough cause the brige pup is Duncan JB. So I started messing around with the pickups and electronics...
  3. Pickups & wiring
    Hi, About to re-wire my H-H guitar, whilst doing this I'm going to shield it at the same time. I'm planning to use guitarnuts style shielding and star grounding (I've been very happy with results I've had using this in the past). My question is about the pick-up cavities. The pick-ups are...
  4. Pickups & wiring
    I just converted a squire strat to an HH guitar with two seymour duncan humbuckers. When I plug in the thing hums louder than any single coil guitar I have. What's going on?
  5. Pickups & wiring
    That's a question I'd like to ask you 'bout wiring of humcancelling pups: If I have any humcancelling pup (in my case DiMarzio Virtual Vintage Solo) and I wanna put it in the middle position of my JEM to get humcancelling sound in position 3 of standard 5-way switch how I should wire it? my...
  6. Classified Ads: Guitars and Gear
    Ugh somehow I always have a problem What is the usual resolution to getting about half the gain your pickup should be getting(in this case a dimarzio TZ). Lose wire where. Also I'm getting lots of feedback. I know it means a grounding issue. Is it necessary to ground the white and black wires...
1-6 of 6 Results