Ibanez JEM Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,882 Posts
I looked it up at peavey.com, apparently the reverb is switchable also, so a dual footswitch with a "stereo" (3 conductor) cable is what you need. Latching means that the switch(es) latch in on or off position. Pretty much any dual footswitch made for amps will work. Something like this, http://www.***************.com/srs7/fg=101/g=home/search/detail/base_pid/158006/ is what you need.

edit, didn't know links were filtered, go to ***************.com and search for "dual footswitch" to see examples.

Roger
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top