So the other day it was mentioned in a forum that to adjust the action on an Original edge it was not necessary to release tension on the strings because its made out of high quality hardened steel. What are you opinions on this and also if I release the string tension when adjusting action do I also block the tremolo or let it sink into the body while I adjust? Also if you're releasing the string tension to adjust the tremolo and you do block it does blocking the bridge to preserve the 90 Degree angle negate the tension released by detuning the strings? I'd like to have a healthy conversation. Also just to add to said conversation I spoke with a Floyd Rose tech about this a while ago concerning a FRT 01000 series bridge which is also made out of hardened steel and he noted it was not necessary. I do realize these are different bridges made to different standards and what not but similar metals are used. Thought it might be worth mentioning. Thank you in advance I appreciate any and all input on this matter. I've heard so many different opinions on this its nuts.