Ibanez JEM Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Hey guys,

So I just stumbled upon posts on some forums stating that the Ibanez Edge can be replaced with the Edge pro. In that regard, I was wondering if anyone here has replaced their Edge for the Pro and could chime in on what kind of differences they noted.

If anyone could provide their input it would be appreciated!
 

·
Vendor
Joined
·
26,521 Posts
The EP has a much larger block, I've dropped them in guitars with no issues and have also had internal rubbing from the block on the side of the rout. It's inside the guitar so trimming it back can't be seen.

It's much lower profile but plays a little stiffer IMO.
 

·
Vendor
Joined
·
26,521 Posts
You could put it in 7 and it would be free in 5 and bind in 2. Model doesn't matter, they all have the same rout. The locator stud is never guaranteed to be in the correct spot and wood frags on the inside never need to be cleaned up inside a guitar with plenty of block clearance you're eliminating by making the block wider.
 
1 - 4 of 4 Posts
Top