Ibanez JEM Forum banner

Edge Zero type bridge users, finally a block upgrade!

7707 Views 15 Replies 8 Participants Last post by  LonePhantom

Saw this on my FB feed this morning. Finally an option for those using the latest bridge models from Ibanez.

Considering the extra work to make a block shaped like this the price seems pretty fair.
See less See more
1 - 7 of 16 Posts
And just to let people know, these will fit Edge Zero, Edge Zero II, ZR, and ZR II.
No idea, I think 7 string trems have different mounting on the baseplate. Maybe you can confirm with them by dismantling your trem and measuring the mounting holes on the baseplate, and measuring the block dimensions. Compare it with their measurements and see if they are the same as the six string model.
I hope the fit the 7 string bridges. I've been waiting for FU-Tone to do one. They say they'll have one this summer. $65 is a bit steep though.
Considering the extra work to make this $65 is pretty fair. If FU-Tone make one to properly fit the bridges like this one I see them selling theirs for at least as much, probably more.
It's easy as. Get the saddles out of the way and unscrew the existing block and put the new one on. Plenty of info out there on what these blocks to for your tone. I've reviewed a bunch on my blog, and even done an install write up too. Easy as.
It increases sustain, attack and treble.

I'm about to order another one for a 7VWH.
I think you are missing one big part, they really thicken and warm up the tone over the stock pot metal blocks Ibanez use.
1 - 7 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.