Ibanez JEM Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
686 Posts
What comes to mind is the little metal indicator things (idk what the technical term is) under some Gibson top hat knobs...



If you could glue something to the metal piece (or just bend it so it touches, or make a similar type of piece, etc.) so there would be constant contact with the knob, then file out a small indent on the knob itself, the sweet spot could be felt and you could still turn it all the way down. Not the most scientific approach for sure, but all my caveman brain can muster up.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top